-Air King clamp bolt-Air King clamps should be used on all Air King shank fittings-Made of plated iron-1/2" Diameter x 1" - 1-12/64" hose OD-The ridges on the underside provide additional retentionAir King clamps should be used on all Air King shank ..
-Transparent sight disc allows visual inspection of oil level-Installation is recommended within 25 feet of the tool to be lubricated-Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor-Des..
-Transparent sight disc allows visual inspection of oil level-Installation is recommended within 25 feet of the tool to be lubricated-Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor-Des..
-Air King universal coupling triple Connection-Triple connection consists of three universal couplings that provide an extra outlet when connected to the line-Made of iron-Include safety clipDixon Air King couplings are recommended for use on virtual..
-Air King 4-Lug quick acting universal coupling hose end-Made of iron-Include safety clip-1-1/4" Hose end barbed-Rated to 150 psi working pressureDixon Air King couplings are recommended for use on virtually any type of pneumatic equipment. The maxim..
-Air King 4-Lug quick acting universal coupling hose end-Made of iron-Include safety clip-2" Hose end barbed-Rated to 150 psi working pressureDixon Air King couplings are recommended for use on virtually any type of pneumatic equipment. The maximum r..
-Air King universal coupling hose end-Shanks are long and deeply corrugated-Made of iron-3/4" Hose end barbed-Include safety clipDixon Air King couplings are recommended for use on virtually any type of pneumatic equipment. The maximum recommended wo..
-Air King universal coupling male NPT end-Male NPT thread with hex for a wrench-Made of iron-3/4" NPT male end-Include safety clipDixon Air King couplings are recommended for use on virtually any type of pneumatic equipment. The maximum recommended w..
-Male fitting for connecting air hose to a female fitting-Brass for resistance to corrosion-Connection on one end for a hose with 1/2" ID and 7/8" OD and 1/2" male NPTF connection on the other end-Provides durable connection for hose repair-Maximum p..
-King combination nipple for low-pressure discharge or suction service-Connects to a hose on one end and an NPT female connector on the other-Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability-Barbed fitting..
-Clip locks any spray pattern-Pistol-grip water nozzle-Easy squeeze on/off lever-Heavy duty all zinc metallized body; rubber handle guard-Brass valve and adjusting nut; stainless steel spring with lifetime packingPistol-grip water nozzle. Easy squeez..
-Coupling for connecting a hose to a pipe or fitting-Hose barb on one end and female NPSM threads on the other-Steel shank for greater resistance to rust than iron and brass nut for corrosion resistance, ductility at high temperatures, and low magnet..
-Coupling for connecting two hoses or pipes with the same diameter in a straight run-Connects to a hose on one end and an NST male connector on the other-Plated iron for strength, malleability, ductility, and resistance to corrosion-Rubber gasket for..
-King combination nipple for low-pressure discharge or suction service-Connects to a hose on one end and an NPT female connector on the other-Aluminum for lighter weight and resistance to corrosion and tarnishing-Barbed fitting for a tight seal on ho..
-King short shank suction coupling for connecting two hoses with the same diameter in a straight run-Hose barb on one end and NPSM male threads on the other-Aluminum for resistance to corrosion and chemicals-Barbed fitting for a tight seal on hosesTh..