-Throttle body is mounted on the intake pipe between the air flow meter and the engine, and its function is similar to the throttle of the carburetor. The throttle body is linked with the driver's accelerator pedal to control the opening of the throt..
-Throttle body is mounted on the intake pipe between the air flow meter and the engine, and its function is similar to the throttle of the carburetor. The throttle body is linked with the driver's accelerator pedal to control the opening of the throt..
-The Transmission Conductor Plate is a part of the transmission system. The plate is mounted on the valve body of your automatic transmission. The pressure relief valves, shift control valves and speed sensors are mounted on the plate. The conductor ..
-Transfer Case Shift Motor is a part of some vehicl-s four-wheel drive (4WD) system and is responsible for switching between the vehicle's different two and four-wheel drive options. It is a small electric motor that moves parts within the transfer c..
-A HID Ballast is a device required by a xenon headlight (bus also for fluorescent lamps) to regulate voltage and current supplied to the lamp during start. Also does it provides enough voltage and current throughout operation. Without a ballast, the..
-The 4WD axle actuator housing, also called axle disconnect housing, is part of differential that houses the gears and shift fork required to lock both front axles together. It works together with transfer case to send torque to all four wheels. Most..
-Trunk lock actuator, an electronic device that makes "popping the trunk" a snap with one push of a button. The trunk lock actuator is the electric motor that can be remotely triggered via the fob device or is activated by pressing a button inside th..
-A door handle is used to open and close car doors. Although the door handle is probably one of the least complicated parts of your vehicle, it is just as important because it's the one that gives you entry and exit to your car. If isn't working well..
-The intake manifold runner control is an engine management component that is found on newer intake manifold designs. It is usually a motorized or vacuum actuated unit attached to the intake manifold, that controls the opening and closing of butterfl..
-Accelerator Pedal position Sensor's primary job is to monitor the position of the throttle pedal and send an electronic signal to open the throttle body as you depress the gas pedal. The APP sensor essentially tells your engine how fast or slow to d..
-Throttle body is mounted on the intake pipe between the air flow meter and the engine, and its function is similar to the throttle of the carburetor. The throttle body is linked with the driver's accelerator pedal to control the opening of the throt..
-The fuel pump strainer (also referred to as a fuel pump sock or pre-filter) is a part of the fuel pump system. It serves the purpose of removing extraneous substances and water in the fuel that enters the fuel pump. The strainer is fitted on the eng..
-The crankcase vent system separates liquid oil from the air inside the engine and intake. When working correctly, oil is removed from the intake air and returned to the oil pan. Oil vapor remains and is burned up in the combustion chamber. Every car..
Mostrando de 1 a 13 de 13 (1 Páginas)
Bienvenido a Buhostore
Sigue los siguientes pasos para buscar un producto.
1.- En el buscador puede ingresar el link de Amazon ó el ASIN del producto que desea buscar, o un nombre.
2.- Haz clic en el producto que deseas adquirir, se abrirá la descripción del producto seleccionado.
3.- Agrégalo al carrito.
4.- Inicie sesión o regístrese.
5.- Completa el checkout donde deberás especificar tu dirección de facturación, dirección envió y método de pago.
Para mas información nos puedes contactar al: wa.me/56945532161