accesorio de aire de aluminio dixon pl300, lubricador en línea, 1/2 "npt, 30 scfm, 500psi, 1,4 oz de capacidad de aceite
- Marca:
dixon valve & coupling
- Código producto: B00835G5V2
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 134.770
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Transparent sight disc allows visual inspection of oil level
-Installation is recommended within 25 feet of the tool to be lubricated
-Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor
-Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms
-Oil flow regulated by screwdriver screw adjustment
The minimum flow rate that must be achieved for the PL series lubricators to work is 30 SCFM. A flow rate less than 30 SCFM will not create the pressure difference needed between chambers to force the oil into the air stream. Can dispense standard air tool lubricant or Dixon anti-freeze lubricant. Lubricator body is 356-T6 aluminum. The lubricator has two reservoirs. The upper reservoir holds the oil and a lower reservoir that is the passageway for the air to enter. The air and oil mixture exits through the lower reservoir. The oil adjustment valve between the two compartments initially allows air to enter the reservoir to pressurize it, and then it controls the amount of oil entering the air stream. The simple principle behind the operation of this lubricator does not provide for oil shut off when the tool is not being used. To prevent a pressure differential from forcing the remaining oil from the reservoir into the air line, turn the lubricator upside down or open the fill plug to depressurize the reservoir. 500 psi Maximum pressure rating.
-Installation is recommended within 25 feet of the tool to be lubricated
-Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor
-Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms
-Oil flow regulated by screwdriver screw adjustment
The minimum flow rate that must be achieved for the PL series lubricators to work is 30 SCFM. A flow rate less than 30 SCFM will not create the pressure difference needed between chambers to force the oil into the air stream. Can dispense standard air tool lubricant or Dixon anti-freeze lubricant. Lubricator body is 356-T6 aluminum. The lubricator has two reservoirs. The upper reservoir holds the oil and a lower reservoir that is the passageway for the air to enter. The air and oil mixture exits through the lower reservoir. The oil adjustment valve between the two compartments initially allows air to enter the reservoir to pressurize it, and then it controls the amount of oil entering the air stream. The simple principle behind the operation of this lubricator does not provide for oil shut off when the tool is not being used. To prevent a pressure differential from forcing the remaining oil from the reservoir into the air line, turn the lubricator upside down or open the fill plug to depressurize the reservoir. 500 psi Maximum pressure rating.
