conector de manguera de codo de 90 grados de 4 "con plástico abs de 3 15/16" od y 3 11/16 "id para sistemas colectores de polvo 73452

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-These elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles
-Nominal dimensions: both ends have OD of 3 15/16" and ID are 3 11/16"
-Will fit all standard 4" flexible dust collection hose
-90 degree angle with overall length of 7.5" and width of 7.5"
-Made from 1/8" thick ABS abrasion resistant plastic

These elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles. This elbow is at a 90 degree angle. Must be used with hose clamps or quick connectors. Overall length is 7.5" by 7.5" wide. Nominal dimensions: OD of both ends are 3 15/16" and ID are 3 11/16". These ABS plastic connectors are very economically priced to allow you to outfit your dust collection system for maximum performance. These fittings are made from 1/8" thick ABS abrasion resistant plastic and are designed to withstand the abrasive nature of wood chips and saw dust. Due to the potential for built up of static electricity, it is recommended that all dust collection systems with plastic fittings be properly grounded.