Tu carrito

material del parche de reparación de 0,5 m melco t-5500 - traje de neopreno / traje seco, buceo - hot melt, planchar

  • $CLP 60.259
  • $CLP 49.641

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-0.5 Meter length x 30cm width piece of T-5500 Hot Melt Non-Slip Dot Reinforced Material ? easy to cut to any shape.
-Non-Slip, Waterproof / Water Resistant
-For Knee Pads, all types of Repairs / Patching, Seam Reinforcement, Seat Pads, Elbow pads, Glove Facings, external decoration ? Wetsuits / Dry Suits / Waders / Scuba
-Material remains flexible after application with excellent durability in use and resistance to salt water hydrolysis
-Easy to apply using domestic Iron (medium / hot setting 135-1500 C) or heat press

T-5500 Hot Melt Dot Reinforced Repair Material - Non-Slip - Wetsuit / Drysuit, Scuba - 30cm Width Suitable for a wide range of applications but is most commonly used for knee pads, seam reinforcement, all types of repairs, seat pads, elbow pads, glove facings and also external decoration on wetsuits, dry suits, waders, fishing, canoe / paddle waterproofs etc. It has excellent durability and resistance to salt water hydrolysis. Not only does it add strength to the seam or repair it also remains flexible after application. T-5500 is used by major manufacturers of neoprene Wetsuits & Dry Suits throughout the world and is a tried and tested product. We have been successfully supplying T-5500 to the industry for more than 15 years. Further technical information on our range of Seam Sealing Tape is available on our website at http://www.wbm-uk.com/tapes.htm. Application Instructions: T-5500 is applied using a hand iron or heat press. The temperature needs to be on a medium / medium hot setting 135-150 deg C- the dwell time is the important factor and this can only be determined by experimentation - suggest in the region of 10 seconds (possibly longer depending on material thickness) with pressure applied. Ideally apply the T-5500 to a small piece of waste fabric first to test adhesion strength - after test application and allowing time for cooling pull back the edge and you should feel a strong resistance. For a good seal to be achieved the temperature must be hot enough for the adhesive to be flowing / molten and pressure must be applied across the full width of the patch.