paquete de 10 piezas de repuesto de sellador de 8 pulgadas con agarre de 200 mm x 2 mm y cintas de teflón, kits de reparación de sellador de impulso para selladores térmicos de 8 pulgadas, adecuado para la mayoría de los selladores manuales
- Marca:
labzhang
- Código producto: B08QJ24WMN
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 24.430
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Item Packing Quantity: 10 replacement heating elements and 10 Teflon Tapes.
-Suitable Products: Suitable for most (but not all) sealing machines marked with "8 inches", please make sure that the size of your sealing machine is consistent with the product size!
-Excellent Material:The replacement heating elements have high electric resistance, good surface oxidation resistance, high temperature level and long service life.Teflon Tapes are used between low temperature -196? and high temperature 300?. It has the characteristics of anti-oxidation, high insulation, anti-static, high strength, etc.
-Product Size: Sealing Length: 8 inch (200mm), Seal width: 0.08 inch (2mm). For Most brand 8" hand impulse sealer.
?Method Of Use1.During the sealing process of the manual heating sealing machine, insert the AC power cord into the socket, adjust the heating time according to the thickness of the sealing material, place the plastic bag on the sealing surface, press the handle, the circuit automatically controls the heating time, the indicator light goes out, about 1.2 seconds , Release the handle, and the seal is completed.2.The seal is damaged because the heating time is too long, please turn the button to shorten the heating time; the seal is not strong, because the heating time is too short, please turn the button to extend the heating time. When the plastic bag is stuck on the rubber pressure plate, it indicates that the cooling time is not enough, and the time after the indicator light goes out.After the heating time is adjusted, there is no need to adjust it under continuous use.?Warm Prompt1.Please keep the sealing surface clean to avoid oxidation caused by residue on the sealing surface and reduce the life of the heating strip and high temperature cloth;2.Do not wipe the sealing surface with a wet cloth;3.If the gasket under the heating strip is damaged, it will cause a short circuit to damage the heating strip. Before each replacement, check whether the gasket needs to be replaced. If it is damaged, it needs to be replaced.
-Suitable Products: Suitable for most (but not all) sealing machines marked with "8 inches", please make sure that the size of your sealing machine is consistent with the product size!
-Excellent Material:The replacement heating elements have high electric resistance, good surface oxidation resistance, high temperature level and long service life.Teflon Tapes are used between low temperature -196? and high temperature 300?. It has the characteristics of anti-oxidation, high insulation, anti-static, high strength, etc.
-Product Size: Sealing Length: 8 inch (200mm), Seal width: 0.08 inch (2mm). For Most brand 8" hand impulse sealer.
?Method Of Use1.During the sealing process of the manual heating sealing machine, insert the AC power cord into the socket, adjust the heating time according to the thickness of the sealing material, place the plastic bag on the sealing surface, press the handle, the circuit automatically controls the heating time, the indicator light goes out, about 1.2 seconds , Release the handle, and the seal is completed.2.The seal is damaged because the heating time is too long, please turn the button to shorten the heating time; the seal is not strong, because the heating time is too short, please turn the button to extend the heating time. When the plastic bag is stuck on the rubber pressure plate, it indicates that the cooling time is not enough, and the time after the indicator light goes out.After the heating time is adjusted, there is no need to adjust it under continuous use.?Warm Prompt1.Please keep the sealing surface clean to avoid oxidation caused by residue on the sealing surface and reduce the life of the heating strip and high temperature cloth;2.Do not wipe the sealing surface with a wet cloth;3.If the gasket under the heating strip is damaged, it will cause a short circuit to damage the heating strip. Before each replacement, check whether the gasket needs to be replaced. If it is damaged, it needs to be replaced.
