kit de medidor de turbidímetro de turbidímetro portátil amtast probador de turbidez con viales de muestra de vidrio de 2 piezas rango: 0 ~ 1100 ntu / fnu, 0 ~ 275 ebc, 0 ~ 9999 asbc

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Easy to operate, accurate results. Memory Stores up to 100 data sets
-USB interface provided for data to be stored and transferred to your computer
-Two measurement modes:the single measurment mode and the continuous measurements
-When battery is depleted, you can use the USB cable connected to computer as a temporarily power supply
-Package List: AMT27 Turbidimeter; Glass Sample Vials (2 PCS) ; Default Calibration Standards: 0.02 NTU, 200 NTU, 500 NTU, 1000 NTU; Lint-free cloth; Carrying Case

Measurement Range: 0~1100 NTU/FNU, 0~275EBC, 0~9999 ASBCResolution: 0.01(0~100 NTU), 0.1 (100~999NTU), 1 (999~1100 NTU)Accuracy:-2%(0~500 NTU),-3% (501~1100NTU)Default Calibration Standards: 0.02 NTU,200 NTU, 500 NTU, 1000 NTU or User-DefinedLight Source: Infrared-emitting diode (850nm wave length)Detector: Silicon PhotodiodeStray Light: <0.02 NTUSample Vials: 60(H)-25(Dia)mmPower Off: Manualor Automatic (15 minutes)Reset Function: YesMemory: Stores up to 100 data setsOutput: USB Communication InterfaceOperating Temperature: 0~6-C-Important Notes for Measurement and Calibration:Do not hold the meter in the hand during measurement and calibration.-Glass vials and caps must be cleaned thoroughly with deionised water after each measurement. Minor residuals can cause errors.-The outside of the vial must be clean and dry, before starting the test. Wipe the vial with alint-free cloth to remove fingerprints or water drops.-If the vial has minor scratches or scuffs, add a few drops of silicone oil to outside of the vial. Wipe with lint-free cloth.-For the low turbidity samples (0 to200NTU), we recommend that you use the same be aligned with the arrow on the meter.-To avoid errors from ambient light interference, do not use the meter in bright sunlight. Always close the light shield lid during measurement and Calibration.-Avoid spillage of water in the sample chamber. It may cause damage to the meter.