equipo contra incendios de latón, boquilla de manguera simple, 1-1 / 2 "npsh , 10" de longitud, orificio de 1/2 "
- Marca:
safby
- Código producto: B08J2QWQC5
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 124.575
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Fire equipment plain hose nozzle
-Made of brass
-1-1/2" NPSH/NPT thread
-10" Length
-Maximum 100 psi pressure
Product Feature Material - Brass Size - 1.5 inches Threads ? NPSH/NPT Approximate Distance - 60 feet Maximum operating pressure - 100psi Approximate Gallons Per Minute (GPM) ? 75 Positions - Fog, straight stream and offNOTE: This nozzle will only connect to a 1.5" NPSH/NPT hose, not for NST/NH thread ?NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread.But NST or NH is more common these days. NH = NST. ?NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasketin the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOTthread into a female metal or pvc pipe. ?NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a taperedthread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.
-Made of brass
-1-1/2" NPSH/NPT thread
-10" Length
-Maximum 100 psi pressure
Product Feature Material - Brass Size - 1.5 inches Threads ? NPSH/NPT Approximate Distance - 60 feet Maximum operating pressure - 100psi Approximate Gallons Per Minute (GPM) ? 75 Positions - Fog, straight stream and offNOTE: This nozzle will only connect to a 1.5" NPSH/NPT hose, not for NST/NH thread ?NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread.But NST or NH is more common these days. NH = NST. ?NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasketin the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOTthread into a female metal or pvc pipe. ?NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a taperedthread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket.
