juego de cortadores de discos circulares con 10 perforaciones de 1/8 "a 1-1 / 4" de diámetro para hacer joyas, herramientas de troquelado de metal redondas
- Marca:
pmc supplies llc
- Código producto: B07D8XRVXQ
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 214.039
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-This professional-quality disc cutter set cuts perfect circles each and every time
-The holes of the tool have been drilled, reamed, and honed in order to make fine and clean cutters
-Designed to cut soft metals up to 18 gauge
-Features 10 punch sizes: 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", and 1-1/4"
-Punches are constructed from solid, high-density, and durable steel; included base is made of solid rubber for a secure hold
This professional-quality disc cutter set cuts perfect circles each and every time. It features a lever-style opener to spread the die plates apart. The holes of the tool have been drilled, reamed, and honed in order to make fine and clean cutters. Designed to cut soft metals up to 18 gauge. This set includes 10 different punch sizes: 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", and 1-1/4". Punches are constructed from solid, high-density, and durable steel. The included base is made of solid rubber for a secure hold.Safety First: Always use proper eye protection and be cautious when using sharper-edged objects.Instructions: Use a disc cutter on top of a rubber bench block or pad for support. Use a cutting lubricant, such as "Cut Lube" to lubricate the cutting edges of the punch. Use a suitable mallet, never a nail driving hammer. We suggest our 1 lb or 2 lb brass mallets. Always support the opposite side of the cutter with a sheet of the same diameter metal that you are cutting; this will help keep the upper and lower parts of the disc cutter in alignment and help minimize material sticking in the disc cutter. Do not exceed the maximum thickness recommended for your disc cutter. Only cut soft non-ferrous metals like brass, copper, silver, and gold. Make sure that your cutting edges are down. To prevent rust, keep your disc cutter well-lubricated between uses, and always be sure to store it in a dry location. We recommend to use this with a rubber bench block pad to extend the life of the cutters. Finish your blank by drilling a hole for a chain or cord by using our 2-hole puncher that can be found in our shop. Also, try hand stamping letters, numbers, or shapes into your blanks! Browse our wide variety of stamps to suit your specific needs. Please contact us with any questions. Thanks for looking!
-The holes of the tool have been drilled, reamed, and honed in order to make fine and clean cutters
-Designed to cut soft metals up to 18 gauge
-Features 10 punch sizes: 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", and 1-1/4"
-Punches are constructed from solid, high-density, and durable steel; included base is made of solid rubber for a secure hold
This professional-quality disc cutter set cuts perfect circles each and every time. It features a lever-style opener to spread the die plates apart. The holes of the tool have been drilled, reamed, and honed in order to make fine and clean cutters. Designed to cut soft metals up to 18 gauge. This set includes 10 different punch sizes: 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", and 1-1/4". Punches are constructed from solid, high-density, and durable steel. The included base is made of solid rubber for a secure hold.Safety First: Always use proper eye protection and be cautious when using sharper-edged objects.Instructions: Use a disc cutter on top of a rubber bench block or pad for support. Use a cutting lubricant, such as "Cut Lube" to lubricate the cutting edges of the punch. Use a suitable mallet, never a nail driving hammer. We suggest our 1 lb or 2 lb brass mallets. Always support the opposite side of the cutter with a sheet of the same diameter metal that you are cutting; this will help keep the upper and lower parts of the disc cutter in alignment and help minimize material sticking in the disc cutter. Do not exceed the maximum thickness recommended for your disc cutter. Only cut soft non-ferrous metals like brass, copper, silver, and gold. Make sure that your cutting edges are down. To prevent rust, keep your disc cutter well-lubricated between uses, and always be sure to store it in a dry location. We recommend to use this with a rubber bench block pad to extend the life of the cutters. Finish your blank by drilling a hole for a chain or cord by using our 2-hole puncher that can be found in our shop. Also, try hand stamping letters, numbers, or shapes into your blanks! Browse our wide variety of stamps to suit your specific needs. Please contact us with any questions. Thanks for looking!
