firstinfo extractor de aceite neumático / manual de 15 litros / bomba de vacío extractor de líquido incluye manguera de líquido de frenos de silicona de 6.5 pies de largo + manguera adicional de 3.5x4.5 mm con almacenamiento de manguera y cubierta antipol

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-*Larger 15L Capacity*- 15 Liter of capacity (holds up to 3.9 gal of fluid ) which is perfect for cars with large engines without stopping the oil changing during the extraction. FIRSTINFO?s oil extractors are made of polypropylene which can stand up 3-F~20-F?s fluids.
-*No Limits, Work Freely & Widely* -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. No limits to any places and no need to lift up or crawl under the car to change oil. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity or acidity high temperature are FORBIDDEN to be used with this extractor.
-*Multi-Function w/ Upgraded Brake Bleeding Hose*+ Plus Version Design w/ Hose Storage -- One extra upgraded brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) Long with check valve to avoid oil back flowing when bleeding. With the storage hose to collect oil hoses easily, and duster cover to avoid any dust and dirt.
- *Two-Way Mode for Oil Change*-- Fast extraction speed of 1.6L /min. The pneumatic way for higher speed of oil change; just need to connect with air compressor. Manual operation requires no other equipment; easy to do the oil / fluid changing for DIY anywhere. No need to to lift up or crawl under the car to change oil.
-*Different sizes of Nylon tubes/ Extra 3.5x4.5mm Thinnest One*-- With 4 diameters of tubes which can go into the bottom of oil pan. Nylon oil hoses B: 7.8x9.8mm X 1M C:5.3x6.7mm X 1M D:4x6mm X 1M E:3.5x4.5mm X1M. B hose can be connected to (C,D or E ) hose and it will extend to 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.

Specification:

1. Our extractor is easy to operate and suitable for engine oil, brake fluid, water...etc.
2. It is suitable to most of domestic and import vehicles on the market.
3. It is provided with fixing valve and safety cup for automatically cuting off extracting.
4. 4 kinds (B.C.D.E) nylon tubes can be extracted any non-corrosive fluid.
5. This extractor is for pneumatic and manual operation, non-spark, non-power, very easy and convenient to operate.
6. It is provided with three air outlets with check valve design which is quick and easy to release the air from the tank.
7. It is provided with new decompression valve which is easy to release the negative pressure.

? Air inlet: 1/4" US quick connector
? Avg. air cons: 2 CFM
? Fluid temperature range: -C- 9-C (3-F- 20-F)
? Working pressure range: 40~170 PSI (2.8~11.7 Bar; 0.28~1.17 Mpa)

Standard Accessories:

A: One brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid backflow when bleeding; and with universal rubber adapter which can fit to most brake fitting types.
B: 7.8 x 9.8mm Nylon hose
C: 5.3 x 6.7mm Nylon hose
D: 4 x 6mm Nylon hose
Option Hose--E: 3.5 x 4.5 mm Nylon hose