medidor de humedad de grano, lds-1g, medidor de humedad de grano digital portátil, medidor de humedad, analizador de higrómetro de semillas para mijo, cereales, café, arroz, maíz, trigo
- Marca:
nice choose
- Código producto: B07Z4RP4C1
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 219.596
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-? MAIN PARAMETER?Environment temperature: 0 -- 40 degree centigrade. Moisture range: 3~35%, Working humidity: ?80%.
-? LCD DISPLAY?Display test results in a few seconds, can accurately read data. Test error is small, and very easy to operate
-? WIDELY USED?Grain humidity meter are suitable for seed, millet, cereal, coffee bean, rice, corn, wheat, black soybeans, sorghum, mung beans, etc.
-? PLEASE NOTE?Because of the zone and species difference and the limitation to the pr-established standard species parameters. it is possible to find the error when using the default parameters defined by the factory. The customer can use following way to calibrate the error and standard to make sure the precision.
-? BEST SERVICE?100% Refund Guarantee, please be assured the purchase. Our products are sent from the US and can be delivered quickly. If you have any questions or quality issue,please feel free to contact us. NICE CHOOSE will do our best to help you solve the problem.
??? grain moisture meter, seed moisture meter, cereal moisture meter.1) revisory value confirmation: Based on the standard samples by means of 10-C over, the corrective value means the standard value minus the test result. For example, the Tested moisture is 13.6% and the actual moisture needed to display is 14%, so we should add 0.4, and the current reviser value is 0.4. Otherwise it will be the negative value.2) In revising status: Spill the sample from the instrument, press the species key for long time till flash and then loose it. The red lamp under the low left corner of the display will be bright, and the instrument will display the default revisory value "0.0". It means that the instrument is now in the revising status.3) Revision: Press the "+" key to add 0.4, then press the OK key to save. The revision is completed when the lamp flashes. Press the species key or switch off to exit. The complete procedure refers to following illustration.Standard setup: If you want to add the measurable species or you can prepare the standard sample by yourself, you can use.
-? LCD DISPLAY?Display test results in a few seconds, can accurately read data. Test error is small, and very easy to operate
-? WIDELY USED?Grain humidity meter are suitable for seed, millet, cereal, coffee bean, rice, corn, wheat, black soybeans, sorghum, mung beans, etc.
-? PLEASE NOTE?Because of the zone and species difference and the limitation to the pr-established standard species parameters. it is possible to find the error when using the default parameters defined by the factory. The customer can use following way to calibrate the error and standard to make sure the precision.
-? BEST SERVICE?100% Refund Guarantee, please be assured the purchase. Our products are sent from the US and can be delivered quickly. If you have any questions or quality issue,please feel free to contact us. NICE CHOOSE will do our best to help you solve the problem.
??? grain moisture meter, seed moisture meter, cereal moisture meter.1) revisory value confirmation: Based on the standard samples by means of 10-C over, the corrective value means the standard value minus the test result. For example, the Tested moisture is 13.6% and the actual moisture needed to display is 14%, so we should add 0.4, and the current reviser value is 0.4. Otherwise it will be the negative value.2) In revising status: Spill the sample from the instrument, press the species key for long time till flash and then loose it. The red lamp under the low left corner of the display will be bright, and the instrument will display the default revisory value "0.0". It means that the instrument is now in the revising status.3) Revision: Press the "+" key to add 0.4, then press the OK key to save. The revision is completed when the lamp flashes. Press the species key or switch off to exit. The complete procedure refers to following illustration.Standard setup: If you want to add the measurable species or you can prepare the standard sample by yourself, you can use.
