amplificador de potencia de subwoofer mono kenwood excelon x502-1 clase d
- Marca:
kenwood
- Código producto: B07PQNJQPS
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 411.132
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
-Detachable sliding terminal cover offers a sleek design and easier installation.
-All terminals and connections are on one side for easier installation and a cleaner look.
-Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
-The amplifier design is Class D, which uses digital switching power supplies. The result is the amplifier runs more efficiently, generating less heat than Class AB amps. The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.
Kenwood's Excelon X502-1 mono subwoofer amplifier can send up to 500 watts RMS to your subwoofer, and it'll fit almost anywhere in your vehicle. A precise low-pass filter lets you optimize the sound for your sub, while the built-in bass boost lets you dial in just the right amount of thump. The subsonic filter removes ultra-low bass so that your amp and subs can operate more efficiently.Class D technology ensures that this compact amp will run cool and perform reliably. Kenwood divided the amp's internal circuitry ? analog, digital, and power supply ? onto separate, non-overlapping circuit boards for improved overall sound quality. The X502-1 accepts input signals via RCA cables from an aftermarket receiver or by way of your vehicle's speaker wiring, so it'll work with almost any mobile audio system. If you do use the speaker-level inputs, the amp can sense the signal and turn itself on, so you won't need to run a separate remote turn-on lead to the receiver or fuse box.-Product highlights:Mono subwoofer amplifier300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)CTA-2006 compliantClass-D amplifier designVariable low-pass filter (50-200 Hz at 24 dB/octave)Bass boost (0-18 dB at 40 Hz)Subsonic filter (25 Hz at 24 dB per octave)Preamp and speaker-level inputsWiring and hardware not included with amplifier8-gauge power and ground leads recommendedFuse rating: 30A x 28-7/16"W x 2-1/8"H x 5-15/16"D-What's in the box:Mono subwoofer amplifierTwo 30-amp ATC fuses (installed)Terminal cover (installed)8" Speaker level input harnessFour 5/8" ScrewsInstruction manual (English/ French/ Spanish)
-Detachable sliding terminal cover offers a sleek design and easier installation.
-All terminals and connections are on one side for easier installation and a cleaner look.
-Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
-The amplifier design is Class D, which uses digital switching power supplies. The result is the amplifier runs more efficiently, generating less heat than Class AB amps. The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.
Kenwood's Excelon X502-1 mono subwoofer amplifier can send up to 500 watts RMS to your subwoofer, and it'll fit almost anywhere in your vehicle. A precise low-pass filter lets you optimize the sound for your sub, while the built-in bass boost lets you dial in just the right amount of thump. The subsonic filter removes ultra-low bass so that your amp and subs can operate more efficiently.Class D technology ensures that this compact amp will run cool and perform reliably. Kenwood divided the amp's internal circuitry ? analog, digital, and power supply ? onto separate, non-overlapping circuit boards for improved overall sound quality. The X502-1 accepts input signals via RCA cables from an aftermarket receiver or by way of your vehicle's speaker wiring, so it'll work with almost any mobile audio system. If you do use the speaker-level inputs, the amp can sense the signal and turn itself on, so you won't need to run a separate remote turn-on lead to the receiver or fuse box.-Product highlights:Mono subwoofer amplifier300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)CTA-2006 compliantClass-D amplifier designVariable low-pass filter (50-200 Hz at 24 dB/octave)Bass boost (0-18 dB at 40 Hz)Subsonic filter (25 Hz at 24 dB per octave)Preamp and speaker-level inputsWiring and hardware not included with amplifier8-gauge power and ground leads recommendedFuse rating: 30A x 28-7/16"W x 2-1/8"H x 5-15/16"D-What's in the box:Mono subwoofer amplifierTwo 30-amp ATC fuses (installed)Terminal cover (installed)8" Speaker level input harnessFour 5/8" ScrewsInstruction manual (English/ French/ Spanish)
