aitrip 3 pcs tcs-34725 tcs34725 módulo de reconocimiento de color con sensor de color de luz rgb sensor de color rgb con filtro ir y led blanco para arduino
- Marca:
aitrip
- Código producto: B08L7MS8L4
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 28.701
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Low Power: 2.5-uA Sleep State
-Strong point: Input Voltage Levels Compatible with VDD or 1.8 V Bus
-Feature: I2C Fast Mode Compatible Interface
-Advantage: Data Rates up to 400 kbit/s
-Widely Applications: RGB LED Backlight Control ; Light Color Temperature Measurement; Product Color Verification and Sorting; Fluid and Gas Analysis; Ambient Light Sensing for Display Backlight Control;
TCS-34725 TCS34725 RGB Color Light Sensor Colour Recognition Module For ArduinoApplications-RGB LED Backlight Contro---Light Color Temperature MeasurementProduct Color Verification and SortingFluid and Gas AnalysisAmbient Light Sensing for Display Backlight ControlSpecification:Detection distance: 3-10mmWorking Voltage: 3.3 or 5VLow Power: 2.5-uA Sleep StateStrong point: Input Voltage Levels Compatible with VDD or 1.8 V BusFeature: I2C Fast Mode Compatible InterfaceAdvantage: Data Rates up to 400 kbit/s65-uA wait state with programmable wait state time from 2.4 ms to > 7 SecondsPINOUT:LED = LED control input. Leave floating for LED always on. Pull LOW to turn LED offINT = Interrupt output active LOW. Output is open-collector so requires pull-up resistor. Connects to an interrupt input on the uC if used.SDA = I2C SDA line. Connects to SDA on uCSCL = I2C SCL line. Connects to SCL on uC3V3 = 3.3V output from the on-board 3.3V regulatorGND = Ground connects to ground on the uCVIN = Power input. Connects to 3.3V or 5V on the uCPack included:3pcs TCS34725 RGB Light Color Sensor Recognition Module
-Strong point: Input Voltage Levels Compatible with VDD or 1.8 V Bus
-Feature: I2C Fast Mode Compatible Interface
-Advantage: Data Rates up to 400 kbit/s
-Widely Applications: RGB LED Backlight Control ; Light Color Temperature Measurement; Product Color Verification and Sorting; Fluid and Gas Analysis; Ambient Light Sensing for Display Backlight Control;
TCS-34725 TCS34725 RGB Color Light Sensor Colour Recognition Module For ArduinoApplications-RGB LED Backlight Contro---Light Color Temperature MeasurementProduct Color Verification and SortingFluid and Gas AnalysisAmbient Light Sensing for Display Backlight ControlSpecification:Detection distance: 3-10mmWorking Voltage: 3.3 or 5VLow Power: 2.5-uA Sleep StateStrong point: Input Voltage Levels Compatible with VDD or 1.8 V BusFeature: I2C Fast Mode Compatible InterfaceAdvantage: Data Rates up to 400 kbit/s65-uA wait state with programmable wait state time from 2.4 ms to > 7 SecondsPINOUT:LED = LED control input. Leave floating for LED always on. Pull LOW to turn LED offINT = Interrupt output active LOW. Output is open-collector so requires pull-up resistor. Connects to an interrupt input on the uC if used.SDA = I2C SDA line. Connects to SDA on uCSCL = I2C SCL line. Connects to SCL on uC3V3 = 3.3V output from the on-board 3.3V regulatorGND = Ground connects to ground on the uCVIN = Power input. Connects to 3.3V or 5V on the uCPack included:3pcs TCS34725 RGB Light Color Sensor Recognition Module
