accesorios de acoplador para remolques de bicicleta instep y schwinn, acoplador plano para una amplia gama de tamaños, modelos y estilos de bicicletas
- Marca:
schwinn
- Código producto: B0013TR66I
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 32.816
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Coupler attaches an InStep or Schwinn trailer made before 11/2/16 to a bike
-Comes with lock washer, coupler plate, and locking pin
-Compatible with Schwinn and InStep brand Trailers
-Trailers made after 11/2/2016 will use coupler part number 25-SA075
-Sport type: Training
This is the part needed to connect a Schwinn or InStep trailer to your bike. It is called a coupler, but it acts like a trailer hitch for your bicycle. It allows a trailer to be connected and reconnected on a daily basis without tools. All trailers usually come with the coupler that works with that trailer, but it can be helpful to have an extra installed on additional adult bikes, so different riders can take turns pulling. The installation requires the removal of the nut that bolts on the rear wheel. Once it is on you will be able to hitch and unhitch the bike before or after a ride easily. Comes with three parts; coupler plate, lock washer and a locking pin. The 25-SAO75 model coupler fits Schwinn and Instep trailers manufactured after October 25, 2016 (AF). If your trailer was made before, 10/25/16 look for part number 25-SA074A to be compatible with your trailer. If you are not sure of the date of manufacture of the trailer, look for a date code on the tow bar of the trailer usually on a sticker. Look for a #2 stamped in the metal of the tow bar to confirm that it was made after 10/25/16.
-Comes with lock washer, coupler plate, and locking pin
-Compatible with Schwinn and InStep brand Trailers
-Trailers made after 11/2/2016 will use coupler part number 25-SA075
-Sport type: Training
This is the part needed to connect a Schwinn or InStep trailer to your bike. It is called a coupler, but it acts like a trailer hitch for your bicycle. It allows a trailer to be connected and reconnected on a daily basis without tools. All trailers usually come with the coupler that works with that trailer, but it can be helpful to have an extra installed on additional adult bikes, so different riders can take turns pulling. The installation requires the removal of the nut that bolts on the rear wheel. Once it is on you will be able to hitch and unhitch the bike before or after a ride easily. Comes with three parts; coupler plate, lock washer and a locking pin. The 25-SAO75 model coupler fits Schwinn and Instep trailers manufactured after October 25, 2016 (AF). If your trailer was made before, 10/25/16 look for part number 25-SA074A to be compatible with your trailer. If you are not sure of the date of manufacture of the trailer, look for a date code on the tow bar of the trailer usually on a sticker. Look for a #2 stamped in the metal of the tow bar to confirm that it was made after 10/25/16.
