Tu carrito

aumio dispensador de jabón de cámara trio gel de ducha champú acondicionador con 3 botellas recargables de 350 ml abs montaje en pared negro

  • Marca:

    aumio

  • Código producto: B07ZZ2LJ69
  • Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
  • $CLP 61.541

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Environmental ABS plastic: Sturdy and durable. Heat resistant, not easily deformed, no bacterial, anti corrosion, healthy and sanitary to use. The product is 100% filled in clean water tests during production. If the bottle is found to be wet, this is normal.
-Three soap dispensers wall mounted, durable and elegant, ideal for lotions liquid soaps or sanitizer, disinfectant, shower gel, shampoo etc.There is a stopper in the bottle containing the liquid, and there is a bead in it. It cannot be plugged. If it is blocked, there will be no liquid. It is easy to cause the liquid to condense in the plug in winter. It is recommended that you clean it after using it for a while, so that the liquid can be discharged.
-With separated outlet liquid nozzle, Avoid Leaking & Waste, refillable and separated bottle which can be took out from the shower soap dispensers.
-Easy to install and use: Can be fitted either in a corner or flat against the wall, all fixings supplied. Individual soap dispenser lift off the wall for easy cleaning.
-Perfect to use at bathroom, hotel, gym, club, home and etc. Note: this is not fit for thick conditioner, shampoo and etc. or you can dilute them by adding water first.

Note? This product is 100% loaded into the clean water test in the production process. If water drops are found in the product, water mist is a normal phenomenon.. Suggest? Because the concentration of the washing liquid such as shampoo, hair lotion, body wash and hand soap in different regions is different, if the concentration of the above washing liquid is too concentrated, it is strongly recommended to first put the soap dispenser into the water to press the normal water. After that, you can pour off the remaining water and then fill in the required washing liquid. Because this dispenser is not fit for thick conditioner, shampoo and etc. Specification: Material: ABS Plastic Dimension: 20x21.5x7.5 cm / 7.88x8.47x2.93" Dimension of one soap dispenser: 6.5x21.5x7.5 / 2.56x8.47x2.93" Capacity: 350ml of each Output: 1ml Instructions? (1). Rotate the lock on the cap with the key provided counterclockwise and remove the cap. (2). Squeeze the back side of the bottle and the bottom plate buckle, and use the other hand to push the bottle up to remove the bottle. (3). Using the mounting base plate as a template, mark the drilling position mark on the wall with a pen, then drill a 6mm hole in the mark, and then insert it with the supplied rubber plug, and fix the mounting base plate to the wall with screws. (4). Install the bottle in the direction of the arrow, pour the required liquid, cover the bottle cap, and use the lock to use it. When there is air in the pump head for the first time, please press it several times until the liquid is discharged. Package included: 3x Soap dispenser 1x Back plate for 3 soap dispenser 2x Keys 3x Screw set