alden 8440p grabit pro extractor de tornillos rotos y tornillos dañados, 4 piezas
- Marca:
alden
- Código producto: B001A4CWHO
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 56.615
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Two-step drill bit and extractor in one tool. Multiple tools not required.
-Self centering drill tip; no walking or wandering. No grinding, center punching required.
-Can be used in quick change chucks. Easy to use.
-Tempered twice for extra hardness. Results in multiple extractions per tool.
-Made from M2 HSS. Highest quality steel used and made in the USA.
Product DescriptionRemove broken and damaged screws and bolts in two easy steps. Each of the four dual ended bits in this set feature a burnishing tip to prepare the screw or bolt for removal and a threaded tip to grip and extract them when powered with a 3/8" drill. Removes many types of screws up to 4" in length including hex, Phillips, and square drive and bolts up to 3/8". Each of the four bits are different widths to handle a different range of screw and bolt sizes. Additional Features: Bit #1 handles No. 4-No. 7 screws and No. 10 bolts (5mm) Bit #2 handles No. 8-No. 10 screws and 1/4" bolts (6mm)Bit #3 handles No. 11-No. 14 screws and 5/16" bolts (8mm)Bit #4 handles No. 16-No. 24 screws and 3/8" bolts (10mm)Amazon.comEverybody knows the frustration of removing stripped screws and bolts. With the Alden 4-Piece Grabit Broken Bolt and Damaged Screw Extractors Set, you can finally get rid of that headache. It is industrial strenghth and is made from high quality tool steel. It is designed to be used in a variable reversible drill but is also effective using a 1/4 inch hex screwdriver and extracts many type fasteners including: Phillips, Slotted, Hex, Trox, Tri-Wing,Pozidriv, Fearson, most tamper resistant screws and many more.From the ManufacturerPro Grabit 4 piece kit works on damaged screws and broken bolts from as small as No. 4 screw to as large as 3/8 in. bolt. Quickly and easily removes most damaged screws such as Hex, Phillips, Torx, Square Drive; sizes No.4 - 24 from wood, plastic or metal up to 3 inches in length. Two-step drill bit and extractor in one tool extracts broken bolts and damaged screws fast; use in reverse only when drilling and extracting with reversible hand held power drill. Can drill up to grade 8 or 10.9 class fasteners; extracts bolt sizes No. 10 - 3/8 in. (5mm - 10mm). Serrated extracting end of tool results in greater torque for hard to remove bolts and screws. No bolt preparation required. Professional grade multi-purpose extractors compatible with "quick-connect" chuck systems or chucked directly into drill. Good for multiple extractions with single tool.
-Self centering drill tip; no walking or wandering. No grinding, center punching required.
-Can be used in quick change chucks. Easy to use.
-Tempered twice for extra hardness. Results in multiple extractions per tool.
-Made from M2 HSS. Highest quality steel used and made in the USA.
Product DescriptionRemove broken and damaged screws and bolts in two easy steps. Each of the four dual ended bits in this set feature a burnishing tip to prepare the screw or bolt for removal and a threaded tip to grip and extract them when powered with a 3/8" drill. Removes many types of screws up to 4" in length including hex, Phillips, and square drive and bolts up to 3/8". Each of the four bits are different widths to handle a different range of screw and bolt sizes. Additional Features: Bit #1 handles No. 4-No. 7 screws and No. 10 bolts (5mm) Bit #2 handles No. 8-No. 10 screws and 1/4" bolts (6mm)Bit #3 handles No. 11-No. 14 screws and 5/16" bolts (8mm)Bit #4 handles No. 16-No. 24 screws and 3/8" bolts (10mm)Amazon.comEverybody knows the frustration of removing stripped screws and bolts. With the Alden 4-Piece Grabit Broken Bolt and Damaged Screw Extractors Set, you can finally get rid of that headache. It is industrial strenghth and is made from high quality tool steel. It is designed to be used in a variable reversible drill but is also effective using a 1/4 inch hex screwdriver and extracts many type fasteners including: Phillips, Slotted, Hex, Trox, Tri-Wing,Pozidriv, Fearson, most tamper resistant screws and many more.From the ManufacturerPro Grabit 4 piece kit works on damaged screws and broken bolts from as small as No. 4 screw to as large as 3/8 in. bolt. Quickly and easily removes most damaged screws such as Hex, Phillips, Torx, Square Drive; sizes No.4 - 24 from wood, plastic or metal up to 3 inches in length. Two-step drill bit and extractor in one tool extracts broken bolts and damaged screws fast; use in reverse only when drilling and extracting with reversible hand held power drill. Can drill up to grade 8 or 10.9 class fasteners; extracts bolt sizes No. 10 - 3/8 in. (5mm - 10mm). Serrated extracting end of tool results in greater torque for hard to remove bolts and screws. No bolt preparation required. Professional grade multi-purpose extractors compatible with "quick-connect" chuck systems or chucked directly into drill. Good for multiple extractions with single tool.
