cincel de mortaja para carpintería profesional de acero checo narex con mango de madera de haya europea teñida tamaños de 4 mm a 12 mm 811205-811212
- Marca:
narex
- Código producto: B01GLNO0AU
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 58.341
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Made by a highly respected edge tool manufacturer in the Czech Republic
-Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
-Available in sizes from 4 mm to 12 mm
-Bevel ground at a 25 degree bevel
-Handles made from stained European Beech wood and have 2 steel ferruls
These professional Narex mortise chisel blades are 5 7/8 inches long with primary bevels ground at 25 degrees. The blade widths taper .030 inches from tip to shoulder for sidewall clearance. The blade thickness tapers from 3/8 inch at the tip to 1/2 inch at the shoulder. Handles are stained Beech and are 6 1/8 inches long, are 1 1/2 inches in diameter and have an oval cross section for a good firm grip. The blades have a well-seated heavy steel tang and the handles have 2 steel ferrules to withstand heavy plows from a mallet. Overall lengths are 12 inches.
-Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
-Available in sizes from 4 mm to 12 mm
-Bevel ground at a 25 degree bevel
-Handles made from stained European Beech wood and have 2 steel ferruls
These professional Narex mortise chisel blades are 5 7/8 inches long with primary bevels ground at 25 degrees. The blade widths taper .030 inches from tip to shoulder for sidewall clearance. The blade thickness tapers from 3/8 inch at the tip to 1/2 inch at the shoulder. Handles are stained Beech and are 6 1/8 inches long, are 1 1/2 inches in diameter and have an oval cross section for a good firm grip. The blades have a well-seated heavy steel tang and the handles have 2 steel ferrules to withstand heavy plows from a mallet. Overall lengths are 12 inches.
