4389102 kit de placas de control de sensor de máquina de hielo para refrigerador compatible con whirlpool kenmore kitchenaid maytag jenn air reemplaza w10757851 w10290817 ap5956767 w10193666 adc9102 2198586 ps557945 ap313751
- Marca:
btntven
- Código producto: B07KCVKR6L
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 47.880
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-?Ideal Replacement?: Want a new Ice Maker Emitter Sensor Control Board that matches the original, for far less than going back to the dealership? This refrigerator control board was specifically designed to look and function the same as the original Emitter Sensor Control Board on your Whirlpool Ice Maker. While this is NOT a genuine Whirlpool part, it is a direct replacement and it will appear, fit and work like the factory part.
-?REPLACEMENT ICE MAKER OPTIC BOARD? - The ice maker is controlled by this 'Optics Board Kit' that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). If the ice level control board fails, the ice maker will stop making ice.
-?Compatible?: Refrigerator ice maker ice level optics control board kit- Includes emitter and receiver control boards.Designed to fit specific Whirlpool manufactured refrigerator models including Jenn Air Kenmore Kitchen Aid Maytag. You can send us refrigerator models number, we can help you to confirm if it can work or not.
-?Replaces Part Numbers?: ADC9102 AP3137510 PS557945 PS10064583 2220398 2220402 W10193666 W10193840 2198585 2198586 2198588 2255114 W10290817 4388635 4389102 4389102R W10757851 AP595676 PS10064583 TJ4389102R.
-[SATISFACTION GUARANTEE]: Order from KONDUONE, 100% Refund or Exchange for Customer Service Satisfaction Guarantee, true worry-free shopping experience. If the Icemaker Control Board ever fails on your Refrigerator simply contact us for a replacement.
Super Exquisite and Durable Icemaker Control Board KitHow To Test The Whirlpool Ice Maker Optic Control Boards 4389102Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned ?ON?. The status LED should blink twice, pause, and then repeat (blink blink?. pause. blink blink? pause).Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.Diagnostics 3 : If there is no status LED light, then the ice maker could be in ?harvest? mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102 Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.Step3: Next, remove the three Phillips screws on the left hand side.Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.Specification: Brand: BTNTVEN Condition: 100% Brand New and never used Package Includes: 1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual
-?REPLACEMENT ICE MAKER OPTIC BOARD? - The ice maker is controlled by this 'Optics Board Kit' that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). If the ice level control board fails, the ice maker will stop making ice.
-?Compatible?: Refrigerator ice maker ice level optics control board kit- Includes emitter and receiver control boards.Designed to fit specific Whirlpool manufactured refrigerator models including Jenn Air Kenmore Kitchen Aid Maytag. You can send us refrigerator models number, we can help you to confirm if it can work or not.
-?Replaces Part Numbers?: ADC9102 AP3137510 PS557945 PS10064583 2220398 2220402 W10193666 W10193840 2198585 2198586 2198588 2255114 W10290817 4388635 4389102 4389102R W10757851 AP595676 PS10064583 TJ4389102R.
-[SATISFACTION GUARANTEE]: Order from KONDUONE, 100% Refund or Exchange for Customer Service Satisfaction Guarantee, true worry-free shopping experience. If the Icemaker Control Board ever fails on your Refrigerator simply contact us for a replacement.
Super Exquisite and Durable Icemaker Control Board KitHow To Test The Whirlpool Ice Maker Optic Control Boards 4389102Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned ?ON?. The status LED should blink twice, pause, and then repeat (blink blink?. pause. blink blink? pause).Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.Diagnostics 3 : If there is no status LED light, then the ice maker could be in ?harvest? mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102 Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.Step3: Next, remove the three Phillips screws on the left hand side.Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.Specification: Brand: BTNTVEN Condition: 100% Brand New and never used Package Includes: 1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual
