yldee 12 / 24v probador de potencia para automóvil probador de circuito de sonda, pantalla digital cc / ca, probador de potencia para automóvil sin contacto con pantalla led, probador de circuito eléctrico para automoción,
- Marca:
yldee
- Código producto: B089FJKGQN
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 139.606
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Supply Power or Ground-------For 12v-24v, Supply Power or Ground for Functional Component Testing, to determine the polarity and circuit circumstance (short/open). And this car current probe can activate the components with positive or negative current without jumper wire.
-Positive and negative drive----Voltage & Polarity Testing, Continuity Testing, Signal Circuit Testing , Activating Components in hand as well as in the vehicle. And Testing Trailer Lights and Connections, Activating Components W/Ground, Red/Green Polarity LED illumination, Following & Locating Short Circuits, Checking for Bad Ground Contacts?No need to connect between the battery and the testing components.
-Frequency measurement-----Measuring frequency of the High-tension ignition pulses and we could calculate the rotational speed of engine according to the measured frequency. Testing the voltage of the circuit and the voltage reading will be indicated on the LCD display within 1/10th of a volt.
-Short Protection--------If the current is overload, it can protect your Functional Component Testing.Testing the voltage of the circuit and the voltage reading will be indicated on the LCD display within 1/10th of a volt. It makes the device from overload. This safer measure can protect the tool and your components.
-Support multiple vehicles-------For cars, boats, trailers, ATV, motorhomes and many other vehicles,Also, the built-in flashlight is bright enough to light up your work area.Power probe scan kit is the most revolutionary circuit tester, which performs each type of service.The long leads allows me to easily bring power and ground from the battery to the dash or where ever you need to test.When testing a circuit, the processor is quick to respond.
The Ultimate in Circuit Testing The Power Probe 3 is a Digital Voltmeter that works off of 12-24 Volt sources, with the ability to apply Power and Ground. Using an Auxiliary Ground cable to check Continuity and test components, the tool is protected by an 8 Amp Circuit Breaker.Activating Components in Your Hand and The Vehicle With a flip of the power switch, you have a hot instant/grounding for voltage & polarity testing. It powers up components such as windows, lights, starters, wipers, and so on. Simultaneously uses the hot lead and the ground wire to activate elements right in your hand. Test Tool Specifications DC voltage range: 0-65V +1digit Resistance range: 0-100 k? Rating current: 1-10 Amp Frequency response of tone pass through 0Hz to 10Khz. Testing Standard:100% current: Hold > 1 hour150% current: trip in one hour200% current: trip in 3-30 seconds.300% current: trip in 0.5-4.0 seconds.
-Positive and negative drive----Voltage & Polarity Testing, Continuity Testing, Signal Circuit Testing , Activating Components in hand as well as in the vehicle. And Testing Trailer Lights and Connections, Activating Components W/Ground, Red/Green Polarity LED illumination, Following & Locating Short Circuits, Checking for Bad Ground Contacts?No need to connect between the battery and the testing components.
-Frequency measurement-----Measuring frequency of the High-tension ignition pulses and we could calculate the rotational speed of engine according to the measured frequency. Testing the voltage of the circuit and the voltage reading will be indicated on the LCD display within 1/10th of a volt.
-Short Protection--------If the current is overload, it can protect your Functional Component Testing.Testing the voltage of the circuit and the voltage reading will be indicated on the LCD display within 1/10th of a volt. It makes the device from overload. This safer measure can protect the tool and your components.
-Support multiple vehicles-------For cars, boats, trailers, ATV, motorhomes and many other vehicles,Also, the built-in flashlight is bright enough to light up your work area.Power probe scan kit is the most revolutionary circuit tester, which performs each type of service.The long leads allows me to easily bring power and ground from the battery to the dash or where ever you need to test.When testing a circuit, the processor is quick to respond.
The Ultimate in Circuit Testing The Power Probe 3 is a Digital Voltmeter that works off of 12-24 Volt sources, with the ability to apply Power and Ground. Using an Auxiliary Ground cable to check Continuity and test components, the tool is protected by an 8 Amp Circuit Breaker.Activating Components in Your Hand and The Vehicle With a flip of the power switch, you have a hot instant/grounding for voltage & polarity testing. It powers up components such as windows, lights, starters, wipers, and so on. Simultaneously uses the hot lead and the ground wire to activate elements right in your hand. Test Tool Specifications DC voltage range: 0-65V +1digit Resistance range: 0-100 k? Rating current: 1-10 Amp Frequency response of tone pass through 0Hz to 10Khz. Testing Standard:100% current: Hold > 1 hour150% current: trip in one hour200% current: trip in 3-30 seconds.300% current: trip in 0.5-4.0 seconds.
