lds-1g detector de medidor de humedad de grano digital probador de medición de humedad de cereales higrómetro analizador equipo de prueba para granos café sido arroz trigo mijo soja maíz maíz
- Marca:
tfcfl
- Código producto: B086YWDDG5
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 239.831
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Features?Moisture determination, grain, high precision, accurate data, high quality materials, safe and healthy, comfortable handle.
-Parameter?Environment temperature: 0 -- 40 degree centigrade. Moisture range: 3~35%, Working humidity: ?80%.
-LCD Display?LCD display large screen design, clear data reading, Using high-precision, high-quality sensors, high-sensitivity.
-Application?Foodstuff and other nonmetal grain sample, such as rice, wheat, maize, so bean , rapeseed ,coffee etc.
-100% Service Satisfaction?USA STOCK, delivery time need about 5-8 days. If you have any problems with the purchasing, please feel free to contact us. we are always at your service.
Descriptiongrain moisture meter, seed moisture meter, cereal moisture meter.Because of the zone and species difference and the limitation to the pre-established standard species parameters.it is possible to find the error when using the default parameters defined by the factory. The customer can use following way to calibrate the error and standard to make sure the precision.1) revisory value confirmation:Based on the standard samples by means of 10-C over, the corrective value means the standard value minus the test result. For example, the Tested moisture is 13.6% and the actual moisture needed to display is 14%, so we should add 0.4, and the current reviser value is 0.4. Otherwise it will be the negative value.2) In revising status:Spill the sample from the instrument, press the species key for long time till flash and then loose it. The red.lamp under the low left corner of the display will be bright, and the instrument will display the default revisory value "0.0". It means that the instrument is now in the revising status.3) revision:Press the "+" key to add 0.4, then press the OK key to save. The revision is completed when the lamp flashes.Press the species key or switch off to exit.The complete procedure refers to following illustration.
-Parameter?Environment temperature: 0 -- 40 degree centigrade. Moisture range: 3~35%, Working humidity: ?80%.
-LCD Display?LCD display large screen design, clear data reading, Using high-precision, high-quality sensors, high-sensitivity.
-Application?Foodstuff and other nonmetal grain sample, such as rice, wheat, maize, so bean , rapeseed ,coffee etc.
-100% Service Satisfaction?USA STOCK, delivery time need about 5-8 days. If you have any problems with the purchasing, please feel free to contact us. we are always at your service.
Descriptiongrain moisture meter, seed moisture meter, cereal moisture meter.Because of the zone and species difference and the limitation to the pre-established standard species parameters.it is possible to find the error when using the default parameters defined by the factory. The customer can use following way to calibrate the error and standard to make sure the precision.1) revisory value confirmation:Based on the standard samples by means of 10-C over, the corrective value means the standard value minus the test result. For example, the Tested moisture is 13.6% and the actual moisture needed to display is 14%, so we should add 0.4, and the current reviser value is 0.4. Otherwise it will be the negative value.2) In revising status:Spill the sample from the instrument, press the species key for long time till flash and then loose it. The red.lamp under the low left corner of the display will be bright, and the instrument will display the default revisory value "0.0". It means that the instrument is now in the revising status.3) revision:Press the "+" key to add 0.4, then press the OK key to save. The revision is completed when the lamp flashes.Press the species key or switch off to exit.The complete procedure refers to following illustration.
