abn 2in t27 40 grano de alta densidad zirconia alúmina disco de aleta plana roloc roll lock pulido lijado ruedas de papel de lija 10 pk
- Marca:
abn
- Código producto: B01GQMTSIA
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 33.932
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-GET MORE CUTTING POWER: The ABN 2-Inch Angle Grinder Flap Disc 40 Grit Grinding Wheel 10-Pack is a flap wheel kit that is a blend of zirconia and aluminum oxide grain that allows the die grinder sanding disc to self-sharpen for a more powerful, abrasive cut on carbon and mild steel applications
-REDUCE VIBRATIONS: One-sided zirconia flap disc constructed from resin fiber with a fiberglass backing plate to offer extra strength and absorb vibrations without smudges or smears during use; Grinding disc is semi-open to reduce loading on aluminum surfaces
-40 GRIT TO REMOVE HEAVIER STOCK: Angle grinder sanding wheel is designed for working on flat surfaces; These 40 grit flap disc wheels are coarser in build to easily remove heavier stock, smoothing out or blending autobody paint, deburring, removing rust, leveling, stripping, buffing, light grinding, and prepping or finishing flat work surfaces such as stainless steel, aluminum, and non-ferrous metal; Avoid forcefully pushing down on flap disk to prevent wear or damage
-FITS YOUR GRINDER: 2-inch overall diameter x 1/4-inch arbor shoulder mandrel (5.1cm x 0.6cm) to get into tight spots and fit standard 2-inch angle grinders (no backer needed for installation); Maximum 12,000 to 14,000 RPM speed
-PACKAGE CONTENTS: Abrasive disc flapper disc for grinder package includes (10) 40 grit 2-inch flap sanding wheels for your convenience
If you need to clean up welds or remove blemishes on your project, use the ABN 2-Inch Flap Sanding Disc 40 Grit 10-Pack on any carbon or mild steel flat surface. These flapper wheels for grinder are a blend of zirconia and aluminum oxide grain to allow the sanding flap discs to self-sharpen for a more powerful, abrasive cut on carbon and mild steel applications. The one-sided flapper wheel is made of resin fiber with a fiberglass backing plate to absorb vibrations without smudges or smears during use. They are semi-open to reduce loading on aluminum surfaces and have a 2-inch overall diameter x 1/4-inch arbor shoulder mandrel to fit standard 2-inch angle grinders. Avoid forcefully pushing down on flap wheels to prevent wear or damage. 12,000 to 14,000 RPM maximum speed. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
-REDUCE VIBRATIONS: One-sided zirconia flap disc constructed from resin fiber with a fiberglass backing plate to offer extra strength and absorb vibrations without smudges or smears during use; Grinding disc is semi-open to reduce loading on aluminum surfaces
-40 GRIT TO REMOVE HEAVIER STOCK: Angle grinder sanding wheel is designed for working on flat surfaces; These 40 grit flap disc wheels are coarser in build to easily remove heavier stock, smoothing out or blending autobody paint, deburring, removing rust, leveling, stripping, buffing, light grinding, and prepping or finishing flat work surfaces such as stainless steel, aluminum, and non-ferrous metal; Avoid forcefully pushing down on flap disk to prevent wear or damage
-FITS YOUR GRINDER: 2-inch overall diameter x 1/4-inch arbor shoulder mandrel (5.1cm x 0.6cm) to get into tight spots and fit standard 2-inch angle grinders (no backer needed for installation); Maximum 12,000 to 14,000 RPM speed
-PACKAGE CONTENTS: Abrasive disc flapper disc for grinder package includes (10) 40 grit 2-inch flap sanding wheels for your convenience
If you need to clean up welds or remove blemishes on your project, use the ABN 2-Inch Flap Sanding Disc 40 Grit 10-Pack on any carbon or mild steel flat surface. These flapper wheels for grinder are a blend of zirconia and aluminum oxide grain to allow the sanding flap discs to self-sharpen for a more powerful, abrasive cut on carbon and mild steel applications. The one-sided flapper wheel is made of resin fiber with a fiberglass backing plate to absorb vibrations without smudges or smears during use. They are semi-open to reduce loading on aluminum surfaces and have a 2-inch overall diameter x 1/4-inch arbor shoulder mandrel to fit standard 2-inch angle grinders. Avoid forcefully pushing down on flap wheels to prevent wear or damage. 12,000 to 14,000 RPM maximum speed. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
