2 x herramienta de ajuste de carpintería de calibre de plantilla de ajuste de ensambladora de cuchillo de hoja cepilladora
- Marca:
xcalibur
- Código producto: B07SMRZ4JY
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 84.952
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Spring loaded magnetized ceramic stop
-Time Saving Device when mounting and setting planer blades.
-High Setting Acuracy ensuring perfect blade alignment and Surface Finish.
-Fixture can be used in most planer, thickening machine or combination machine.
-The fixture has a strong magnet and clamps it to the tool block. At the center of the fixture is a lever, which has another magnet for maintaining the tip of the blade during the setting.
Our planer & thicknesser knife setting jigs offer a simplified and fast method to change the knives. The jigs can be used with most planers, thicknessers or combination machines. All you need is access to the cutter block, in most cases this means lifting up the planer beds or removing one of the tables completely. The jigs are fitted with strong magnets which will clamp it to the cutter block. In the centre of the jig is a setting rod with another magnet for holding the tip of the blade, during setting. All of our machines, and most other brands too, are supplied with a low cost knife setting tool. Whilst they are adequate, they are time consuming requiring great patience to get both ends of the knife equal. Tightening one bolt often inadvertently moves the opposite end of the knife. On first use, the jigs are set and locked to the exact setting for your machine. Whenever fitting new or re-ground knives from then on, the setting will be saved on the jig and accurate height setting of the knives is made simple. SPECIFICATION Minimum Cutterblock Diameter 75mm Maximum Cutterblock Diameter 125mm Number Of Knives 2-4 Height Adjustment 22mm Increments Of Adjustment 0.15mm Supplied in a wooden storage case. Please Note: The jigs are not suitable for use on planers with aluminium tables which are neither hinged or removeable. (Aluminium is not magnetic!)
-Time Saving Device when mounting and setting planer blades.
-High Setting Acuracy ensuring perfect blade alignment and Surface Finish.
-Fixture can be used in most planer, thickening machine or combination machine.
-The fixture has a strong magnet and clamps it to the tool block. At the center of the fixture is a lever, which has another magnet for maintaining the tip of the blade during the setting.
Our planer & thicknesser knife setting jigs offer a simplified and fast method to change the knives. The jigs can be used with most planers, thicknessers or combination machines. All you need is access to the cutter block, in most cases this means lifting up the planer beds or removing one of the tables completely. The jigs are fitted with strong magnets which will clamp it to the cutter block. In the centre of the jig is a setting rod with another magnet for holding the tip of the blade, during setting. All of our machines, and most other brands too, are supplied with a low cost knife setting tool. Whilst they are adequate, they are time consuming requiring great patience to get both ends of the knife equal. Tightening one bolt often inadvertently moves the opposite end of the knife. On first use, the jigs are set and locked to the exact setting for your machine. Whenever fitting new or re-ground knives from then on, the setting will be saved on the jig and accurate height setting of the knives is made simple. SPECIFICATION Minimum Cutterblock Diameter 75mm Maximum Cutterblock Diameter 125mm Number Of Knives 2-4 Height Adjustment 22mm Increments Of Adjustment 0.15mm Supplied in a wooden storage case. Please Note: The jigs are not suitable for use on planers with aluminium tables which are neither hinged or removeable. (Aluminium is not magnetic!)
