evermarket mecha para desoldar, trenza de soldadura con 2,5 mm de ancho, 1,5 m de longitud y bomba de vacío para desoldar con ventosa de soldadura herramienta para quitar soldadura, azul - 2 paquetes

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-High quality desoldering braid with unique no clean flux and gemetrically- precise weave
-Pure oxygen free copper wire with 0.1"W x 5'L, weight 0.4oz
-Excellent thermal transfer for faster, safer desoldering using lower temperature irons
-High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2" length x 3/4" diameter
-Special Design: Right or Left handed design allows easy one-handed use

Get the solder off and replace them with newer ones, which it is very common when soldering, so this desoldering removal tool will be your perfect companion to suck the solder away effectively. Suck the Solder Away Easily The solder sucker measures 7.48?X0.79?, which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively. Clean the Solder in Detail 2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. No clean flux, oxygen free copper wire. It will be a great accessory to remove the extra solder. How to Use the Desoldering Pump Step 1: Press the plunger down until it is been locked and you will hear a click; Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid; Step 3: Move the tip of the pump next to the molten solder.Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger; Step 4: Repeat this process if necessary. How to Use the Solder Wick Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick; Step 2: Remove the wick once the solder has been absorbed; Step 3: Cut off the used part of the wick; Step 4: Repeat this process if needed Package Included: 2* Solder Sucker 2* Solder Wick