hojas de sierra de corte lateral dremel moto-saw
- Marca:
dremel
- Código producto: B00BULW556
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 33.583
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Total Length: 100 mm
-Cutting Depth: 18 mm
-Teeth per CM: 6
-Blade Width: 0.4 mm
-Blade Depth: 2.5 mm
The Dremel Moto-Saw blades have been designed to tackle a range of different materials including laminate, soft wood, hard wood, PVC or soft sheet metal. Depending on the application and the material, there is always a right selection of blade to achieve the best results. The MS50 Saw blade is for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts.
-Cutting Depth: 18 mm
-Teeth per CM: 6
-Blade Width: 0.4 mm
-Blade Depth: 2.5 mm
The Dremel Moto-Saw blades have been designed to tackle a range of different materials including laminate, soft wood, hard wood, PVC or soft sheet metal. Depending on the application and the material, there is always a right selection of blade to achieve the best results. The MS50 Saw blade is for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts.
