wmycongcong 10 pcs ttp223b módulo de interruptor de sensor capacitivo táctil digital diy para arduino
- Marca:
wgcd
- Código producto: B07JVGCYGX
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 24.517
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Low power consumption.
-Power supply: 2 - 5.5V DC.
-Great replacement for the traditional touch of a button.
-4 M2 screws positioning holes for easy installation.
-Size: 24 x 24 x 7mm/9.45 x 9.45 x 2.76inch (L x W x H).
Specification: Low power consumption Power supply for 2 - 5.5V DC Can replace the traditional touch of a button. Four M2 screws positioning holes for easy installation. The module is a capacitive touch-type touch switch module based on a touch detection IC (TTP223B). Normally, the module outputs a low level, and the mode is a low power mode; when the corresponding position is touched with a finger, the module outputs a high level, and the mode switches to a fast mode; when there is no touch for 12 seconds, the mode is switched to a low mode. Power mode. The module can be mounted on the surface of non-metallic materials such as plastic and glass, and a thin piece of paper (non-metal) can be placed on the surface of the module. As long as the touch is correct, it can be hidden in the wall, desktop, etc. button. This module allows you to eliminate the hassle of conventional push buttons.Package Content: 10 * TTP223B Digital Touch Sensor Module
-Power supply: 2 - 5.5V DC.
-Great replacement for the traditional touch of a button.
-4 M2 screws positioning holes for easy installation.
-Size: 24 x 24 x 7mm/9.45 x 9.45 x 2.76inch (L x W x H).
Specification: Low power consumption Power supply for 2 - 5.5V DC Can replace the traditional touch of a button. Four M2 screws positioning holes for easy installation. The module is a capacitive touch-type touch switch module based on a touch detection IC (TTP223B). Normally, the module outputs a low level, and the mode is a low power mode; when the corresponding position is touched with a finger, the module outputs a high level, and the mode switches to a fast mode; when there is no touch for 12 seconds, the mode is switched to a low mode. Power mode. The module can be mounted on the surface of non-metallic materials such as plastic and glass, and a thin piece of paper (non-metal) can be placed on the surface of the module. As long as the touch is correct, it can be hidden in the wall, desktop, etc. button. This module allows you to eliminate the hassle of conventional push buttons.Package Content: 10 * TTP223B Digital Touch Sensor Module
