eoocvt v4 bestlap lap timer infrarrojos ultrared pista de carreras receptor profesional baliza transmisor cronómetro para coche karting

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

- Make sure this fitsby entering your model number.
- The device memory can keep 1000x race records, each race record holds max. 99 laps; The user can review the last 10 race records that are stored in the memory
- USB connection to PC to upload or download history records.
- 30+ hours working time for each battery recharge; LIR2450 is applied in this device.
- Plug and play connection between the signal receiver and the reader.
- With 2.2 inch big screen,3x AA batteries forthe beacon under optimized power management, working distance and working time are secured.


We deeply know what kind of lap counter device the riders needs: Professional, Powerful, Easy for use, Looks cool. Size80x50.5x14.9mm Power: 3.6V Li LIR2450 battery Capacity:110mAh, charging time: 30 min., Working time: Minimum 30 hours FAQ: 1. What happened if the timing is not accurate? When the battery is very low, RTC(real time clock) will stop working, and the device will not run normally. Recharge it and it will work again. 2. How to download records to computer? Turn off your timer, and connect to PC with USB cord;Turn on your timer, and your PC will recognize it as a FlashDisk. Work on your timer like a flashdisk. 3. Why USD does not work? Charge the battery for a while and try again later; 4. How to change the minimum time interval, for example, 1 sec. 5 sec. 10 sec. The default time interval is 10 seconds, which means your each lap timer must be longer than 10 seconds. To change the minimum time interval, press the T and enter the clock mode, then press S for 6 seconds, see the LED flash, and you will see the new interval, 10 -> 1 ->5 ->10; 5. How to delete old records? In clock mode or history review mode, press the O button 6 seconds, the memory will be formatted, you will see LED flashing during this time; 6. Why the LED does not light up during recharge; Yes the LED wont light up during recharge unless the power is switched on. It is normal. because the device is completely power off when switch is OFF. ALWAYS turn off the device before you stop recharge and unplug the USB.