agarre de cubierta para tabla de surf sin cera rspro hexatraction
- Marca:
rspro
- Código producto: B01GKB3CVG
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 165.891
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Temperature independent grip and traction alternative to wax and pads
-No melting, no hassle, no residues, no contamination.
-Hexagonal Clear pattern so it won't hide the color or graphics of your board
-1 Kit contains 18 individual full hexagons and 4 half hexagons 6.3" tip to tip and a star shaped installation template
-Works everywhere: epoxy, polyester and soft boards.
HexaTraction is a surf wax alternative. Avoid the mess of wax with this translucent and minimally abrasive traction. One kit contains eighteen individual 6.3" Hexagons (measured from tip to tip across) and four half-Hexagons. 1 kit is perfect for outfitting a shortboard or the nose of your Stand Up Paddleboard. 2 - 3 kits are recommended for covering the entire deck of longboards and SUP boards. Installation is done by scraping off your old messy wax. Then, using a paper towel with rubbing alcohol, the remaining wax residue is to be cleaned. You may need to do this twice, first to get a majority of the wax off then a second pass with a fresh paper towel to get all remaining wax off. We recommend to install it at room temperature. Below 68F (20C) the material and glue tend to get rigid, which will make installation more difficult. Thoroughly clean the area with alcohol or similar. Make sure no wax is present. Avoid industrial cleaners. Before starting, lay out the HexaTraction hexagons choosing the best pattern to cover the area where you need grip and traction. PRO TIP: Peel exactly half of the adhesive backing of the first HexaTraction hexagon, so it will be super easy to align with the board centerline. Pour plenty of water. Plenty! It will help in having no air bubbles. Stick on half of the hexagon making sure to remove all air and water out by rubbing with your fingers and/or cloth. Remove the other half of the backing and squeeze all the air and water out. PRO TIP: Squeeze from the center to the edges or from one side and across so all air and water is pushed out. Using the HexaTraction black star as a template, progress through the deck one hexagon at a time. PRO TIP: Align the template on the side of the hexagon with the adhesive backing still on. Complete the layout using the half hexagons if needed. Allow to dry (not in the sun) and let it cure for a few hours before heading out in the water.
-No melting, no hassle, no residues, no contamination.
-Hexagonal Clear pattern so it won't hide the color or graphics of your board
-1 Kit contains 18 individual full hexagons and 4 half hexagons 6.3" tip to tip and a star shaped installation template
-Works everywhere: epoxy, polyester and soft boards.
HexaTraction is a surf wax alternative. Avoid the mess of wax with this translucent and minimally abrasive traction. One kit contains eighteen individual 6.3" Hexagons (measured from tip to tip across) and four half-Hexagons. 1 kit is perfect for outfitting a shortboard or the nose of your Stand Up Paddleboard. 2 - 3 kits are recommended for covering the entire deck of longboards and SUP boards. Installation is done by scraping off your old messy wax. Then, using a paper towel with rubbing alcohol, the remaining wax residue is to be cleaned. You may need to do this twice, first to get a majority of the wax off then a second pass with a fresh paper towel to get all remaining wax off. We recommend to install it at room temperature. Below 68F (20C) the material and glue tend to get rigid, which will make installation more difficult. Thoroughly clean the area with alcohol or similar. Make sure no wax is present. Avoid industrial cleaners. Before starting, lay out the HexaTraction hexagons choosing the best pattern to cover the area where you need grip and traction. PRO TIP: Peel exactly half of the adhesive backing of the first HexaTraction hexagon, so it will be super easy to align with the board centerline. Pour plenty of water. Plenty! It will help in having no air bubbles. Stick on half of the hexagon making sure to remove all air and water out by rubbing with your fingers and/or cloth. Remove the other half of the backing and squeeze all the air and water out. PRO TIP: Squeeze from the center to the edges or from one side and across so all air and water is pushed out. Using the HexaTraction black star as a template, progress through the deck one hexagon at a time. PRO TIP: Align the template on the side of the hexagon with the adhesive backing still on. Complete the layout using the half hexagons if needed. Allow to dry (not in the sun) and let it cure for a few hours before heading out in the water.
