juego de punzón y cincel de 16 piezas ram-pro | el kit incluye: punzones de pasador de acero, cónicos y centrales, con cinceles en frío y calibre de punzón de cincel | perfecto para trabajos en metal y madera
- Marca:
ram-pro
- Código producto: B01MT8P7ZV
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 84.139
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
- The Ram-Pro Ultimate All-in-one Heavy Duty Punch and Chisel Kit are the Needed Tool Set for any metal or wood worker to Start, Punch, Align, and Mark holes, and get any job done quick and easy. Kit includes various sized punches and chisels for Repairing or Building any type of Project.
- SPECS: 16 PC Kit Includes: 5 Pin Punches ? 5 Taper Punches ? 3 Cold Punches - 2 Center Punches ? 1 Chisel-Punch Gauge | Sizes are carved onto each Punch/Chisel for easy identification - Please refer to Description below for detailed Product Dimensions.
- QUALITY: Made from Heat Treated Chrome Vanadium {CR-V} Steel, Hardness: 54-58 HRC - Heavy Duty Non-Rust Sturdy Punches & Chisels will last through the most extreme impacts without deformation, and will fix mechanic jobs consistently without splitting or bending.
- DESIGN: All Tools have Hex Shafts and is Chamfered on striking end for Durability | ?Pin Punches? have long narrow ends for pin removals ? ?Taper Punches? narrows down all the way for hole alignments ? ?Cold Chisels? have sharp 60 Degree ends for splitting & Blacksmithing Metal ? ?Center Punches? have precise tips for marking metal sheets ? ?Punch/Chisel Gauge? has a 60 degree angle with Min and Max marks.
- USE FOR: The Must-Have Kit for Metal Working Mechanics | ?Pin Punch? is used to remove pins from holes ? ?Taper Punches? is used to punch & align holes ? ?Cold Chisels? is used for splitting rusted nuts and Blacksmithing Metal ? ?Center Punches? makes dimples in cold metals to prevent drill ?wandering? -Punch/Chisel Gauge? used to measure and check the tools ends.
About Ram-Pro Chisel & Punch KitGet 1 Multipurpose Kit for all your punch & chisel needs!Kit includes all the common size punches & chisels you?ll need to start, align, punch & mark holes into wood or metal to get the job done fast & accurate.INCLUDED:-5 Pin Punches:#1 3/32 x- x 4-1/4#2 1/8 x 5/16 x 4-3/4#3 5/32 x 3/8 x 5#4 3/16 x 3/8 x 5-1/4#5- x 7/16 x 5-3/4-5 Taper Punches:#1 3/32 x 5/16 x 5-1/4#2 1/8 x 3/8 x 5-3/4#3 5/32 x 3/8 x 6#4 3/16 x 7/16 x 6-1/4#5- x 7/16 x 6-3/4-3 Cold Chisels:#1 3/8 x 5/16 x 5-1/2#2- x 7/16 x 6#3 5/8 x 15/32 x 6-1/12-2 Center Punches:#1 1/8 x 5/16 x 5#2 3/16 x 7/16 x 6-Chisel-Punch GaugeUSES:Pin Punches:Use a Pin Punch to drive out broken bolts or pin fasteners until it is ejected from the hole.Taper Punches:Use to align holes through which rivets, pins, or bolts will be inserted.Cold Chisels (Blacksmithing):3 various sizes Sharp double edged 60 degree Chisels designed to create fracture lines & accurately splitting metal chains, damaged bolts & iron objects.Center Punches:Effectively make indentations & marks in metal rings or block sheets before drilling holes, & it helps to recess the bit on drilling point.You can use this to transfer dimensions from a paper pattern directly onto metal.Chisel-Punch Gauge:60 Degree Gauge used to check the striking ends of the tools.Use the punches to get automotive tires off car/truck rims or disassemble pallet jacks.Use chisels to split & crack metal chains or rusted nuts.Spread knuckles to remove ball joint studs, drive out pins & bolts, & remove stubborn brake rotor screws.Always wear safety goggles when working with metal.Split Resistant:All the punches & chisels are split resistant due to its chamfered construction on the hammer striking end.The Mechanics and Metal Workers Favorite Kit!
- SPECS: 16 PC Kit Includes: 5 Pin Punches ? 5 Taper Punches ? 3 Cold Punches - 2 Center Punches ? 1 Chisel-Punch Gauge | Sizes are carved onto each Punch/Chisel for easy identification - Please refer to Description below for detailed Product Dimensions.
- QUALITY: Made from Heat Treated Chrome Vanadium {CR-V} Steel, Hardness: 54-58 HRC - Heavy Duty Non-Rust Sturdy Punches & Chisels will last through the most extreme impacts without deformation, and will fix mechanic jobs consistently without splitting or bending.
- DESIGN: All Tools have Hex Shafts and is Chamfered on striking end for Durability | ?Pin Punches? have long narrow ends for pin removals ? ?Taper Punches? narrows down all the way for hole alignments ? ?Cold Chisels? have sharp 60 Degree ends for splitting & Blacksmithing Metal ? ?Center Punches? have precise tips for marking metal sheets ? ?Punch/Chisel Gauge? has a 60 degree angle with Min and Max marks.
- USE FOR: The Must-Have Kit for Metal Working Mechanics | ?Pin Punch? is used to remove pins from holes ? ?Taper Punches? is used to punch & align holes ? ?Cold Chisels? is used for splitting rusted nuts and Blacksmithing Metal ? ?Center Punches? makes dimples in cold metals to prevent drill ?wandering? -Punch/Chisel Gauge? used to measure and check the tools ends.
About Ram-Pro Chisel & Punch KitGet 1 Multipurpose Kit for all your punch & chisel needs!Kit includes all the common size punches & chisels you?ll need to start, align, punch & mark holes into wood or metal to get the job done fast & accurate.INCLUDED:-5 Pin Punches:#1 3/32 x- x 4-1/4#2 1/8 x 5/16 x 4-3/4#3 5/32 x 3/8 x 5#4 3/16 x 3/8 x 5-1/4#5- x 7/16 x 5-3/4-5 Taper Punches:#1 3/32 x 5/16 x 5-1/4#2 1/8 x 3/8 x 5-3/4#3 5/32 x 3/8 x 6#4 3/16 x 7/16 x 6-1/4#5- x 7/16 x 6-3/4-3 Cold Chisels:#1 3/8 x 5/16 x 5-1/2#2- x 7/16 x 6#3 5/8 x 15/32 x 6-1/12-2 Center Punches:#1 1/8 x 5/16 x 5#2 3/16 x 7/16 x 6-Chisel-Punch GaugeUSES:Pin Punches:Use a Pin Punch to drive out broken bolts or pin fasteners until it is ejected from the hole.Taper Punches:Use to align holes through which rivets, pins, or bolts will be inserted.Cold Chisels (Blacksmithing):3 various sizes Sharp double edged 60 degree Chisels designed to create fracture lines & accurately splitting metal chains, damaged bolts & iron objects.Center Punches:Effectively make indentations & marks in metal rings or block sheets before drilling holes, & it helps to recess the bit on drilling point.You can use this to transfer dimensions from a paper pattern directly onto metal.Chisel-Punch Gauge:60 Degree Gauge used to check the striking ends of the tools.Use the punches to get automotive tires off car/truck rims or disassemble pallet jacks.Use chisels to split & crack metal chains or rusted nuts.Spread knuckles to remove ball joint studs, drive out pins & bolts, & remove stubborn brake rotor screws.Always wear safety goggles when working with metal.Split Resistant:All the punches & chisels are split resistant due to its chamfered construction on the hammer striking end.The Mechanics and Metal Workers Favorite Kit!
