roberts 3095-1 adhesivo para alfombras, 1 gal, beige
- Marca:
roberts
- Código producto: B00G71F0AG
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 96.072
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Adheres carpet with most backings, including polypropylene (ActionBac), woven, Axminster, Wilton, hot melt, unitary, needle punch (non woven/needle bond), urethane foam (Enhancer), polyurethane laminate (Lifespan), sponge rubber, jute and latex foam
-Bonds with concrete, underlayment grade APA rated plywood, vinyl composition tile (free of wax) and terrazzo
-For interior, heavy commercial traffic installations
-May be used for direct and double bond installations
-Moisture Control Adhesive up to 10 lbs. MVER and 90% RH
-Up to 20 minutes open time, 40 minutes working time and 24 to 48 hours curing time
-Approximately 65 to 110 sq. ft. per gallon coverage for polypropylene/woven carpet and 100 to 200 sq. ft. per gallon coverage for non woven/closed cell/Enhancer carpet installations
-Suggested for use with a 1/8 " x 1/8 " x 1/8 " U notch trowel, 1/8 " x 1/8 " x 1/16 " V notch trowel, or 3/32 " x 3/32 " x 3/32 " V notch trowel depending on carpet installation type
-solvent free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
-Protected by Gold Guard, an protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
Carpet Adhesive, Size 1 gal., Color Beige, Temp. Range 65 to 95 Degrees F, Curing Time 24 to 48 hr., Application Time Up to 40 min., VOC Content 0m Specific Gravity 1.28, Substrates Concrete, APA Underlayment Grade Plywood, Vinyl Composition Tile (Free Of Wax), Primed Gypcrete (Refer To ASTM F2419), Terrazzo, Characteristics Solvent Free, High Tack, Application For Installing Carpets, Material SBR Latex, Functional Cure 24 to 48 hr.
-Bonds with concrete, underlayment grade APA rated plywood, vinyl composition tile (free of wax) and terrazzo
-For interior, heavy commercial traffic installations
-May be used for direct and double bond installations
-Moisture Control Adhesive up to 10 lbs. MVER and 90% RH
-Up to 20 minutes open time, 40 minutes working time and 24 to 48 hours curing time
-Approximately 65 to 110 sq. ft. per gallon coverage for polypropylene/woven carpet and 100 to 200 sq. ft. per gallon coverage for non woven/closed cell/Enhancer carpet installations
-Suggested for use with a 1/8 " x 1/8 " x 1/8 " U notch trowel, 1/8 " x 1/8 " x 1/16 " V notch trowel, or 3/32 " x 3/32 " x 3/32 " V notch trowel depending on carpet installation type
-solvent free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
-Protected by Gold Guard, an protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
Carpet Adhesive, Size 1 gal., Color Beige, Temp. Range 65 to 95 Degrees F, Curing Time 24 to 48 hr., Application Time Up to 40 min., VOC Content 0m Specific Gravity 1.28, Substrates Concrete, APA Underlayment Grade Plywood, Vinyl Composition Tile (Free Of Wax), Primed Gypcrete (Refer To ASTM F2419), Terrazzo, Characteristics Solvent Free, High Tack, Application For Installing Carpets, Material SBR Latex, Functional Cure 24 to 48 hr.
