adhesivo para tejas de techo tile bond - lata de 28 oz con pajita reutilizable, paquete de 3. adhesivo de espuma curado por humedad, poliuretano, un componente, de expansión mínima para arcilla y tejas
- Marca:
tile bond
- Código producto: B08LLDTZMN
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 329.524
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-PROFESSIONAL GRADE - DuPont Tile Bond Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties, and clips. Minimal expanding Tile Bond also provides greater attachment strength while minimizing nail penetrations and reducing roof weight loads.
-USAGE - Tile Bond is designed for use with low/flat, medium, high, and two-piece barrel profiles of roof tile when applied to a preapproved underlayment. With its easy-to-use dispensing equipment, Tile Bond can be quickly and efficiently dispensed in a highly consistent manner, eliminating the need for expensive equipment and ratio monitoring. It is an excellent choice for all new, reroof and specialty applications, including hip and ridge, rake and valley and field and eave installations.
-ADVANTAGES - Tile Bond offers a number of convenient features such as the lowest cost per installed tile among single component adhesives, moisture cured (can be used on wet substrates), proven to not lift tiles, and hurricane-zone qualified.
-APPROVAL - Tile Bond is Texas DOI, Miami-Dade County and Florida Building Code approved.
-ENVIRONMENTAL DETAILS - Tile Bond has zero ozone-depletion potential. The aerosol has a volatile organic compound (VOC) content of 1.0 wt. % (13g/L). The VOC content was determined according to the California Air Resources Board and the South Coast and Ventura Air Quality Management Districts Rule 1168 Adhesives and Sealants and the Ozone Transport Commission Model Rule for Adhesives and Sealants.
Tile Bond Roof Tile Adhesive from Dow is an exceptional solution for installing roof tile. It goes on fast and stays strong, even in harsh environments like hurricanes, high winds and temperature extremes. Tile Bond is a single-component polyurethane adhesive that can work on a variety of roof tile jobs, including low/flat, medium, high and two-piece barrel (cap and pan) profiles. TILE BOND works in both new and reroof construction and its an excellent choice for patch and repair. Store Tile Bond away from heat sources and between 40-80 degrees Fahrenheit to ensure adhesive quality, maximum yield and shelf life. All one component foams like Tile Bond are moisture cured. Low humidity and cooler temperatures will extend the cure time. However, the final adhesion properties are unaffected.
-USAGE - Tile Bond is designed for use with low/flat, medium, high, and two-piece barrel profiles of roof tile when applied to a preapproved underlayment. With its easy-to-use dispensing equipment, Tile Bond can be quickly and efficiently dispensed in a highly consistent manner, eliminating the need for expensive equipment and ratio monitoring. It is an excellent choice for all new, reroof and specialty applications, including hip and ridge, rake and valley and field and eave installations.
-ADVANTAGES - Tile Bond offers a number of convenient features such as the lowest cost per installed tile among single component adhesives, moisture cured (can be used on wet substrates), proven to not lift tiles, and hurricane-zone qualified.
-APPROVAL - Tile Bond is Texas DOI, Miami-Dade County and Florida Building Code approved.
-ENVIRONMENTAL DETAILS - Tile Bond has zero ozone-depletion potential. The aerosol has a volatile organic compound (VOC) content of 1.0 wt. % (13g/L). The VOC content was determined according to the California Air Resources Board and the South Coast and Ventura Air Quality Management Districts Rule 1168 Adhesives and Sealants and the Ozone Transport Commission Model Rule for Adhesives and Sealants.
Tile Bond Roof Tile Adhesive from Dow is an exceptional solution for installing roof tile. It goes on fast and stays strong, even in harsh environments like hurricanes, high winds and temperature extremes. Tile Bond is a single-component polyurethane adhesive that can work on a variety of roof tile jobs, including low/flat, medium, high and two-piece barrel (cap and pan) profiles. TILE BOND works in both new and reroof construction and its an excellent choice for patch and repair. Store Tile Bond away from heat sources and between 40-80 degrees Fahrenheit to ensure adhesive quality, maximum yield and shelf life. All one component foams like Tile Bond are moisture cured. Low humidity and cooler temperatures will extend the cure time. However, the final adhesion properties are unaffected.
