adhesivo epoxi de grado médico fda-bond 16, de dos partes para procesamiento de alimentos y equipos médicos

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Appearance: Amber
-Mix Ratio, by weight: 100:33 / Resin:Hardener
-Benefits: Medium viscosity low permeability good resistance class VI approved
-Cure Type: Heat cure or Room temperature
-Typical Applications: Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.

Cure Type: Heat cure or Room temperature Typical Applications: Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices. Viscosity @ 25 C, cps: 4,700 @ temperature 77F, 25C Specific Gravity, cured: 0.900 g/cc Pot Life: 25 min Solids Content: 100% Volatile Organic Compounds (VOC) Content: 0.15 g/l Water Absorption , after 24 HR saturation, %: 0.30 Lap Shear Strength alum to alum: 2,100 24 HR @ 25C3300 4 HR @ 65C Hardness, Shore D: 86 4 hrs @ 65C75 24 hrs @ 25C 1 4 hours: @ 65C 24 hours: @ 25C Volume Resistivity: 1.20e+14 ohm-cm CTE, linear: 29.4 in/in-F @ temperature 68.0 F Glass Transition Temp, Tg: 97.0 C, 207 F Operating Temperature: -70 to 145 C FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part For Food Processing & Medical Equipment is a medium viscosity epoxy resin system specifically developed for medical device applications.FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part For Food Processing & Medical Equipment has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part For Food Processing & Medical Equipment completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjecte