2 adaptadores para apple watch de 44 mm conectores de orejetas negras con barras de tornillo exteriores y herramienta de estrella para iwatch series 4 reemplazo de 5 bandas compatible con hermes nike edition se adapta a correas de reloj de hasta 25 mm
- Marca:
nickston
- Código producto: B07MR8H3Y5
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 39.162
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-3pcs Set Includes: 2x Black Adapters and 1x Special Micro Bit Screw Driver Tip (5-point Star Shape)
-COMES WITH BOX
-Compatible ONLY with the Apple Watch 44mm Version. Check your Watch model to make sure it is the correct 44mm version.
-For Apple Watch 44mm Model use a Band Width of 25mm -maximum !
-!!! Before you begin to work with the special screw driver tip and adapters, Make sure to read the Installation Instructions in the Product Description and on the Diagram in the photos, so you don't make any mistakes!!! Watches, Bands or Straps are Not Included !!
Product Description:<><> Precision 5-point Star Shape Screwdriver Bit. Will not strip the tiny delicate screws and will install/remove 1000's of screws without wearing out. The screw driver tip is made from Special High alloy CVM Steel, Hardened, on 4mm hex stock. You can use it thousands of times without damaging it. ( you can connect the tip on 4mm hex Bit Handle or use it by hand) This screw driver is also compatible for : iPhone 4, 4S, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X <><> 1. Unscrew 1 or both of the bolts of the adapters. If you choose to unscrew just 1, the other one just unscrew slightly so it would be easier to work with or move. 2. Then insert the "L" shaped bar holders in the watch band's hole and make sure they connect to each other in the middle (male and female ends). 3. Put the base of the adapter back in the same position to match the holes, so you can then easily screw back on the bolts.<><> *The proper side of the adapter: Make sure before you tighten the bolts, the center security locking mechanism - the silver color Ellipse should be on the bottom of the band (the bottom will be 2 Black Ellipse and Silver color locking mechanism in the middle). The top of the adapter should be 3 equal Black Ellipses. *Its is very important the 3 Black Ellipses shapes of the adapter are always on top and face up when installed on the band. This way the locking center mechanism will lock the band to the watch case. If you put the adapter upside down, the adapter will not lock or it will get improperly stuck in the watch case. When you tighten or unscrew the bolts, do not use too much force because the bolts are small and micro sized. To unscrew the bolts - unscrew counter clockwise. To tighten the bolts - screw clockwise. When tightening , slowly and gently tighten until the bolt just stops turning. Don't use so much force because you will ruin the bolt head. !! Watches, Bands or Straps are Not Included !!
-COMES WITH BOX
-Compatible ONLY with the Apple Watch 44mm Version. Check your Watch model to make sure it is the correct 44mm version.
-For Apple Watch 44mm Model use a Band Width of 25mm -maximum !
-!!! Before you begin to work with the special screw driver tip and adapters, Make sure to read the Installation Instructions in the Product Description and on the Diagram in the photos, so you don't make any mistakes!!! Watches, Bands or Straps are Not Included !!
Product Description:<><> Precision 5-point Star Shape Screwdriver Bit. Will not strip the tiny delicate screws and will install/remove 1000's of screws without wearing out. The screw driver tip is made from Special High alloy CVM Steel, Hardened, on 4mm hex stock. You can use it thousands of times without damaging it. ( you can connect the tip on 4mm hex Bit Handle or use it by hand) This screw driver is also compatible for : iPhone 4, 4S, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X <><> 1. Unscrew 1 or both of the bolts of the adapters. If you choose to unscrew just 1, the other one just unscrew slightly so it would be easier to work with or move. 2. Then insert the "L" shaped bar holders in the watch band's hole and make sure they connect to each other in the middle (male and female ends). 3. Put the base of the adapter back in the same position to match the holes, so you can then easily screw back on the bolts.<><> *The proper side of the adapter: Make sure before you tighten the bolts, the center security locking mechanism - the silver color Ellipse should be on the bottom of the band (the bottom will be 2 Black Ellipse and Silver color locking mechanism in the middle). The top of the adapter should be 3 equal Black Ellipses. *Its is very important the 3 Black Ellipses shapes of the adapter are always on top and face up when installed on the band. This way the locking center mechanism will lock the band to the watch case. If you put the adapter upside down, the adapter will not lock or it will get improperly stuck in the watch case. When you tighten or unscrew the bolts, do not use too much force because the bolts are small and micro sized. To unscrew the bolts - unscrew counter clockwise. To tighten the bolts - screw clockwise. When tightening , slowly and gently tighten until the bolt just stops turning. Don't use so much force because you will ruin the bolt head. !! Watches, Bands or Straps are Not Included !!
