mini molde de vela con cabeza de buda, moldes de resina epoxi para manualidades, molde para manualidades de arcilla de yeso, molde de silicona para decoración para hacer velas
- Marca:
great mold
- Código producto: B08GJJCRZP
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 26.278
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Size of candle:3.6*3.6*5.7 c-(1.4*1.4*2.2Inch) Weight of mold:100 grams, weight of final candle :30 grams?2.1 OZ?
-Application of mold : make candle,wax,resin ,gypsum,clay,epoxy crafts
-Feature of mold : soft ,flexible,no shrinkage, no deformation,,high temperature resistance
-Note 1: this buddha head is small, pls check the size carefully and confirm the size is good for you before you paid the mold.
-Note 2 : the mold is 3D mold , you can cut an opening at one side of the mold if you can not demold easily.
Mini Buddha Head Candle Mold Resin Epoxy Craft Molds Gypsum Clay Crafts Mould Decorating Silicone Mold for Candle Making Specification of Silicone Molds Size of Final Candle Mold: 3.6*3.6*5.7 c-1.4*1.4*2.2Inch? Final Candle Weight:30g approximately(2.1Oz)Material of mold: made of 100% food grade silicone rubberFeature of silicone mold :non-toxic,odorless,no deformation,never break. Temperature Resistance:from -40 to +230 Celsius degree,Freezer, microwave & dishwasher safe Color:Pink Application:Soap Mold, Candle Mold, Wax Mold, Aromatherapy Gypsum Mold,Cake Mold, Chocolate Mold,Decorating Craft Mold,etc...Notification : This kind mold is 3D mold , pls cut an opening on the mold if you can not take out the product easily.Operating instruction for the mold :1, Use knife to cut an opening on the side of mold.2, Using rubber bands to tie up the molds .3, If you make candle , you need to make a hole at the center of the mold bottom ,Lift up the wick with a stick ,and insert the wick from the top to bottom .4,Pouring the material into the mold , you can shake the mold to help release the bubble.5.Take off the rubber bands after the material is cured.6, Take out the product from the opening of the mold carefully. If you have any questions about using the mold, pls kindly contact with us directly , it will be our great pleasure at service for you .
-Application of mold : make candle,wax,resin ,gypsum,clay,epoxy crafts
-Feature of mold : soft ,flexible,no shrinkage, no deformation,,high temperature resistance
-Note 1: this buddha head is small, pls check the size carefully and confirm the size is good for you before you paid the mold.
-Note 2 : the mold is 3D mold , you can cut an opening at one side of the mold if you can not demold easily.
Mini Buddha Head Candle Mold Resin Epoxy Craft Molds Gypsum Clay Crafts Mould Decorating Silicone Mold for Candle Making Specification of Silicone Molds Size of Final Candle Mold: 3.6*3.6*5.7 c-1.4*1.4*2.2Inch? Final Candle Weight:30g approximately(2.1Oz)Material of mold: made of 100% food grade silicone rubberFeature of silicone mold :non-toxic,odorless,no deformation,never break. Temperature Resistance:from -40 to +230 Celsius degree,Freezer, microwave & dishwasher safe Color:Pink Application:Soap Mold, Candle Mold, Wax Mold, Aromatherapy Gypsum Mold,Cake Mold, Chocolate Mold,Decorating Craft Mold,etc...Notification : This kind mold is 3D mold , pls cut an opening on the mold if you can not take out the product easily.Operating instruction for the mold :1, Use knife to cut an opening on the side of mold.2, Using rubber bands to tie up the molds .3, If you make candle , you need to make a hole at the center of the mold bottom ,Lift up the wick with a stick ,and insert the wick from the top to bottom .4,Pouring the material into the mold , you can shake the mold to help release the bubble.5.Take off the rubber bands after the material is cured.6, Take out the product from the opening of the mold carefully. If you have any questions about using the mold, pls kindly contact with us directly , it will be our great pleasure at service for you .
