allsun probador de líquido de frenos portátil herramientas para automóvil herramienta de prueba de diagnóstico frenos automotrices calibrados para dot 3, dot4 y dot 5 con 1 indicador led

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Auto brakes calibration for DOT 3, DOT4, and DOT 5
-LEDs indicating the quality of the Brake fluid
-Quick and easy way to test for moisture content in the Brake fluid
-Measurement range from (0-3%) moisture contain in the Brake fluid
-Power supply: 1.5V button cell, LR44 or Equivalent, 3 piece

Staying safe and knowing that your car is in top condition is most important.
Ideally, brake fluid should be checked regularly and changed every one to two years.
As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase.
This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid.

OPERATING INSTRUCTION
1. Clean the test head ( including two metal probes ) and wipe it dry with cloth.
2. Press the button on the top of the tester to turn on the tester.
EM2272A has three test modes - DOT 3, DOT 4, and DOT 5.1 brake fluid test modes; you must select a proper test mode to match the brake fluid to be tested.
Use the following procedure to select a desired test mode:
(1) With the tester in off state or in test state, press and hold down the button for about 5 secs; the green, yellow and red test indicator LEDs will light in turn.
(2) Release the button, the mode indicator will indicate which mode is the tester is in, as indicated as follows:
If the mode indicator flashes red, the tester is in DOT 3 brake fluid test mode.
If the mode indicator flashes green, the tester is in DOT 4 brake fluid test mode.
If the mode indicator flashes orange, the tester is in DOT 5.1 brake fluid test mode.
(3) When the mode indicator flashes, press the button until the tester is in desired test mode. (The mode indicator indicates the present test mode.) Wait about 5 secs. The tester saves this mode and the mode indicator stops flashing.