8milelake herramienta de limpieza de inyectores de combustible del sistema de combustible herramienta de prueba de inyectores de combustible

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Non-dismantle fuel injector not only features with high and low pressure cleaning function, but also with the whole fuel system including throttle valve, fuel nozzle and combustion chamber
-Used to clean fuel injector, air intake system and three-way catalytic converter. It is a free disassembly cleaning tools that you can use it without the knowledge of car assembling.
-Pressure 0-220PSI? Three-Way Catalytic Converter
-Non-dismantle fuel injector has anti-corrosion, anti-friction connectors for fast- connection and anti-friction oil tubes for all cleaning fluid.

Operation:Check fuel injection model, throttle or EFI: EFI Model : 1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor;2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor;3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work;4. Charge the cleaning fluid into the tank of the cleaner;5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI;6. Check all connect point to make sure there is not leakage;7. Start the engine to clean the fuel system.To the Throttle Style: vTo the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.The way to identify the inlet and return hose: 1. Generally speaking, inlet hose is bigger, return hose is samaller;2. There is always a filter connected in the inlet hose side, and a buffer in the return side;3. There is arrow on the hose to show the fuel flow direction