oemtools 25090 kit de extractor de equilibrador de armónicos, extractor de 3 mordazas ajustable para la mayoría de los vehículos de último modelo, tornillo de fuerza para un impulsor cuadrado de 3/8 ”, incluye 4 varillas de fuerza

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers
-WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995)
-EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process
-INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case; Easily take this harmonic balancer puller set from job to job
-PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4", 5-13/32", 6-1/2", and 7-13/32"); Blow-Molded Carrying Case

The OEM TOOLS Harmonic Balancer Puller is designed for use with Model GM 2000, Generation II Cadillac (1988 - newer), Chevrolet Trucks (2003 - newer), Chrysler (1990), Ford (1995 - newer), and Mitsubishi Eclipse (1995) vehicles. The harmonic damper puller is designed to remove the harmonic balancer from the engine crankshaft. This crankshaft pulley tool is capable of removing harmonic balancer damper pulleys in tight engine compartments without removing the radiator. Our crankshaft pulley removal tool includes the 3-jaw puller, 4 different lengths of forcing adapter rods, and a forcing screw with a 3/8 inch square drive for ratchet use and a 3/4 inch hex for wrench or socket use. This harmonic balance puller includes unique tensioned jaws for easy tool placement in tight quarters--a feature not offered by other brands. Special jaws engage the spokes of pressed-on harmonic balancers that do not have threaded holes, holding the legs in place when positioning the harmonic puller and making it easier to remove the crankshaft balancer. This harmonic puller kit also comes with a heavy-duty blow-molded carrying case, making it easy to transport our harmonic balancer kit from job to job. To use 1. Lubricate and thread the pressure screw into the puller tool. 2. Using a ratchet remove harmonic balancer?s retainer bolt. 3 Select the appropriate adapter rod. 4. Stick the adapter rod into the center of the harmonic balancer and then put the hollow end of the pressure screw over the adapter rod. 5. Insert the jaws through the spoked areas so they?re gripping the center hub. 6. Hand tighten the pressure screw until it makes contact with the adapter rod. 7. Use a ratchet to turn the pressure screw until the harmonic balancer is pulled.