detector de fugas de humo automotriz autool, probador de fugas de tubería de coche evap, localizador de fugas de combustible universal para motocicleta / coche / camión

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank. SDT-106 is for all pipe systems Support EVAP.
-EVAP SYSTEM SUPPORTED -- Comes with EVAP adapters, SDT-106 can help you apply with EVAP System of all vehicles to quickly find out the leak parts. 4ft Smoke Outlet Pipe can help reach and connect perfectly.
-SPECIFICATIONS -- Voltage: DC 12V(Supplied by Automotive Battery). Smoke output value: 10-13L/min. Output Pressure: 9-11PSI. Oppreating material: Mineral Oil or Baby Oil.
-WORKING PRINCIPLE -- The Smoke Machine heat up special oil(mineral oil or baby oil) into smoke and blow smoke into sealed pipe system. You will find out leak point in pipe in where has smoke. Please repair the part where leakage exists.
-With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the ser-vice life of smoke generated part, so please change smoke and oil regularly. When you use this detector the first time, please fill 20-30ml oil, not beyond this range. When the smoke output has water drops, please replace with fresh oil. Before filling fresh oil, please pour out the remaining oil in the detector. Liquid paraffin and baby oil are OK. Please fill fresh oil with equipped oil bottle.

How to use: 1. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. 3. Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4. Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5. Turn on the power switch, and detector starts to work. 6. In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7. After leak detection, please connect well the wires and pipe. 8. Notes: * Please do leak detection away from smoke-sensitive parts. * Do not run the detector over 8 minutes. It needs interval rest. * The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. * The round parts of this detector is with temperature, be careful to avoid scalding injury. Maintenance With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly. 1. Before filling new oil, please pour out the remaining oil in the detector. 2. When the smoke output has water drops, please replace with new oil. 3. Liquid paraffin and baby oil are OK. 4. Please fill new oil with equipped oil bottle 5. When you use this detector the first time, please fill 20-30ml oil, not beyond this range. Packing List: 1. Main Unit 2. Hook 3. Rubber stopples 4. Taper stopple 5. Taper pipe 6. 30ml oil bottle 7. User manual