riiai motorcycle tpms, sistema de monitoreo de presión de neumáticos de motocicleta para tableta de teléfono, sistema de alarma de temperatura de neumáticos con cargador usb qc 3.0
- Marca:
riiai
- Código producto: B0912K4KP4
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 60.812
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-This TPMS is designed to provide you with more protection when riding. It will warn the tire condition in advance. After installing TPMS, this system can monitor the tire pressure and temperature in real time.If any abnormal tire pressure and temperature are detected, the system will send a warning sound and a bright flashing icon to inform you in real time. Real-time reminders and problem solving can prevent traffic accidents and ensure the safety of riders and passengers.
-Bracket installation instructions: 1. Unscrew the 2 screws, put on the motorcycle/electric bike/bicycle and tighten; 2. Place the mounting head of the bracket toward the position you need, and confirm that the bracket is firm; 3. Install the tire pressure receiver on the bracket, tighten it and then lock it; use the ball head to rotate the tuning knob to move the joint part to adjust the appropriate angle appropriately
-When installing, the power cord needs to be connected behind the ignition switch, and the power can be automatically cut off after shutting down. The red connects to the 12V positive pole and the black connects to the ground; Install the fixed bracket on the handlebar and lock it tightly. Install the host on the bracket and adjust the angle and lock it.
-Install the sensor when the host is turned on. First install the tamper ring into the valve nozzle, then install the sensor on the valve according to the position and tighten it, then screw the tamper ring back and tighten it. If you find that there is no corresponding position on the host If the pressure is displayed, reinstall the sensor at the corresponding position.
-Packages List: 1 X Receiver, 2 X Sensors, 1 X Bracket, 1 Set X Accessories
Specification:Model: AN-08ATire pressure setting range: 0.1~6.0BarTemperature setting range: 60-?~100-?Working temperature: -20-?~+80-?Storage temperature: -30-?~+85-?Power voltage: DC 12VOutput voltage: DC 12V, 9V, 5VFrequency: 433.92MHz20.00MHzReceiver:Working temperature --20-?~80-?Storage temperature: -30-?~85-?Power-on voltage: DC 5VFrequency: 433.92MHz20.00MHzSensor:Working temperature: -20-?~80-?Storage temperature: -30-?~85-?Pressure range: 0~6.6BarPressure accuracy: +/-0.1BarTemperature accuracy: +/-3-?Transmitting power: <10dBFrequency: 433.92MHz20.00MHzSensor battery replacement instructions:When replacing the battery of the sensor, please disassemble one by one, install the shell, do not mix or disassemble and install at the same time; it can effectively prevent the sensor from being misplaced and installed on other tires due to the wrong shell. (Button CR1632, working temperature is -30-?~+80-?); it is available in stores.1. Before disassembling the sensor, please prepare a nut wrench, turn the nut clockwise to separate the nut and the sensor, and then remove the sensor counterclockwise;2. Use a wrench to unscrew the upper cover of the sensor in a counterclockwise direction;3. Take out the old battery from the battery clip and do a good job of environmental protection classification;4. Distinguish the positive and negative positions (positive "+" facing up); install a new button battery CR1632.5. Screw on the upper cover of the sensor, and then tighten it clockwise with a wrench
-Bracket installation instructions: 1. Unscrew the 2 screws, put on the motorcycle/electric bike/bicycle and tighten; 2. Place the mounting head of the bracket toward the position you need, and confirm that the bracket is firm; 3. Install the tire pressure receiver on the bracket, tighten it and then lock it; use the ball head to rotate the tuning knob to move the joint part to adjust the appropriate angle appropriately
-When installing, the power cord needs to be connected behind the ignition switch, and the power can be automatically cut off after shutting down. The red connects to the 12V positive pole and the black connects to the ground; Install the fixed bracket on the handlebar and lock it tightly. Install the host on the bracket and adjust the angle and lock it.
-Install the sensor when the host is turned on. First install the tamper ring into the valve nozzle, then install the sensor on the valve according to the position and tighten it, then screw the tamper ring back and tighten it. If you find that there is no corresponding position on the host If the pressure is displayed, reinstall the sensor at the corresponding position.
-Packages List: 1 X Receiver, 2 X Sensors, 1 X Bracket, 1 Set X Accessories
Specification:Model: AN-08ATire pressure setting range: 0.1~6.0BarTemperature setting range: 60-?~100-?Working temperature: -20-?~+80-?Storage temperature: -30-?~+85-?Power voltage: DC 12VOutput voltage: DC 12V, 9V, 5VFrequency: 433.92MHz20.00MHzReceiver:Working temperature --20-?~80-?Storage temperature: -30-?~85-?Power-on voltage: DC 5VFrequency: 433.92MHz20.00MHzSensor:Working temperature: -20-?~80-?Storage temperature: -30-?~85-?Pressure range: 0~6.6BarPressure accuracy: +/-0.1BarTemperature accuracy: +/-3-?Transmitting power: <10dBFrequency: 433.92MHz20.00MHzSensor battery replacement instructions:When replacing the battery of the sensor, please disassemble one by one, install the shell, do not mix or disassemble and install at the same time; it can effectively prevent the sensor from being misplaced and installed on other tires due to the wrong shell. (Button CR1632, working temperature is -30-?~+80-?); it is available in stores.1. Before disassembling the sensor, please prepare a nut wrench, turn the nut clockwise to separate the nut and the sensor, and then remove the sensor counterclockwise;2. Use a wrench to unscrew the upper cover of the sensor in a counterclockwise direction;3. Take out the old battery from the battery clip and do a good job of environmental protection classification;4. Distinguish the positive and negative positions (positive "+" facing up); install a new button battery CR1632.5. Screw on the upper cover of the sensor, and then tighten it clockwise with a wrench
