4882 llave dinamométrica para eje de rueda trasera herramientas manuales similares a hd-47925
- Marca:
moebulb
- Código producto: B07W741G7K
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 34.455
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Allows for simple adjustment of drive belt tension or rear wheel alignment , It helps with getting the axle nut loose without taking the muffler off my Ultra, just to adjust the belt tension.
-36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque
-This wrench has a 1/2" drive hole, Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque.
-Material ? The wrench is finished in a pretty durable black finish.
-Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier.
Similar to HD-47925 Material ? The wrench is finished in a pretty durable black finish. Allows for simple adjustment of drive belt tension or rear wheel alignment , It helps with getting the axle nut loose without taking the muffler off my Ultra, just to adjust the belt tension. 36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque This wrench has a 1/2" drive hole, Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque. Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier.
-36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque
-This wrench has a 1/2" drive hole, Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque.
-Material ? The wrench is finished in a pretty durable black finish.
-Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier.
Similar to HD-47925 Material ? The wrench is finished in a pretty durable black finish. Allows for simple adjustment of drive belt tension or rear wheel alignment , It helps with getting the axle nut loose without taking the muffler off my Ultra, just to adjust the belt tension. 36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque This wrench has a 1/2" drive hole, Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque. Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier.
