20 ft 6an an6 manguera de línea de gas combustible aceite ptfe teflon trenzado universal de acero inoxidable

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil & Coolant etc
-Length:20 Ft , Inner Diameter: 8.13 mm (0.32"), Outside Diameter: 10.92 mm (0.43"), Universal Accessory, Easy to Operate
-Good Quality and Durability, Working Temperature: -60F to 500F (-6-C to + 26-C) under most operating conditions; Working Pressure:3000 PSI - Burst Pressure: 10000 PSI
-Braided fuel hose with special hand feel
-Perfect racing fittings for fuel injection use


Specification:
**Color:Silver
**Size:AN-6
**Inner diameter(ID): 8.13 mm 0.32inch
**Outside diameter(OD):10.92 mm 0.43inch
**Inner hose Materail:PTFE (TEFLON)
**Outside Materail:Stainless Steel
**Working Temperature:-60F to 500F (-6-C to + 26-C) under most operating conditions.
**Working Pressure:3000 PSI
**Burst pressure: 10000 PSI

Application:
1.For use with fuel systems, methanol, oils, lubricants, coolant system and vacuum applications.
2.Suitable for fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes.
3.This hose isn't suitable for brake fluid and is not to be used near extreme heat sources such as a turbocharger.

Package Includes:
20 Feet Stainless Steel Braided Fuel Hose

How to Cut:
For cutting your new steel braided hose to length you will need:
* Cutting wheel/ hack saw/ or steel braided hose cutters
* Duct tape or electrical tape (work best)
1.Measure your hose and find desired length.
2.Tape hose at measured length needed for application.
3.Cut hose threw the tape you have placed.(This keep the steel braid from fraying)
4.Remove the tape.
5.Slide one end of hose into end of fitting.
6.Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7.Make sure all connection are tight.