yoursme para gm 4l80e / 4l85e instalador de sello de teflón de eje de turbina / expansor / herramienta de transmisión de cambio de tamaño 3pcs
- Marca:
yoursme
- Código producto: B082PSQF5F
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 94.222
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Application: Used to help with the installation and re-sizing of the 4L80E & 4L85E Turbine Shaft Seals. Works with all input shaft lengths.
-Great Function: Simple to use and the re-sizer prevents improper installation and damage of the seals. Prevent distortion during installation.
-Similar to Kent-Moore J-38736, Atec Trans-Tool T-2974 & T-2974-M
-This tool will seat both the small and large seals. It comes with the Universal Seal Expander for both ends, the Small End Teflon Seal Re-Sizer and the Large End Teflon Seal Re-Sizer.
-Material: Made from high quality and durable Steel with polishing finish, ensuring a reliable long-term service time.
Application: -- Help with the installation and re-sizing of the 4L80E & 4L85E Turbine Shaft Seals.-- Works with all input shaft lengths-- Similar to Kent-Moore J-38736, Atec Trans-Tool T-2974 & T-2974-M Function:-- The re-sizer prevents improper installation and damage of the seals.-- Prevent distortion during installation. Simple to use:1. Properly remove the old seals, make sure all seal debris is removed from each groove.2. Lube the grooves, new seals, and tools with trans-gel.3. Expand the seals for the small end first to the proper ID.4. Center the new seals in the grooves and gently apply finger pressure to ensure the seals are inserted into the grooves.5. Slide the small re-sizer over the seals using the LONG TAPERED END first, this will ensure the seals are gradually seated into the grooves. NOTE: using the short tapered side first may cause the seals to roll out of the grooves and permanently damage them!!!6. Let the re-sizer set the seals for at least one minute, then flip the re-sizing tool now using the SHORT TAPERED SIDE to insure both seals are properly sized.7. Repeat the same steps for the large end making sure all grooves, seals and tools are properly lubed with trans-gel before installation.100% Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months? warranty Go click the Buy Now Button and get it with confidence! If you have any problem about your order, please feel free to contact us.
-Great Function: Simple to use and the re-sizer prevents improper installation and damage of the seals. Prevent distortion during installation.
-Similar to Kent-Moore J-38736, Atec Trans-Tool T-2974 & T-2974-M
-This tool will seat both the small and large seals. It comes with the Universal Seal Expander for both ends, the Small End Teflon Seal Re-Sizer and the Large End Teflon Seal Re-Sizer.
-Material: Made from high quality and durable Steel with polishing finish, ensuring a reliable long-term service time.
Application: -- Help with the installation and re-sizing of the 4L80E & 4L85E Turbine Shaft Seals.-- Works with all input shaft lengths-- Similar to Kent-Moore J-38736, Atec Trans-Tool T-2974 & T-2974-M Function:-- The re-sizer prevents improper installation and damage of the seals.-- Prevent distortion during installation. Simple to use:1. Properly remove the old seals, make sure all seal debris is removed from each groove.2. Lube the grooves, new seals, and tools with trans-gel.3. Expand the seals for the small end first to the proper ID.4. Center the new seals in the grooves and gently apply finger pressure to ensure the seals are inserted into the grooves.5. Slide the small re-sizer over the seals using the LONG TAPERED END first, this will ensure the seals are gradually seated into the grooves. NOTE: using the short tapered side first may cause the seals to roll out of the grooves and permanently damage them!!!6. Let the re-sizer set the seals for at least one minute, then flip the re-sizing tool now using the SHORT TAPERED SIDE to insure both seals are properly sized.7. Repeat the same steps for the large end making sure all grooves, seals and tools are properly lubed with trans-gel before installation.100% Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months? warranty Go click the Buy Now Button and get it with confidence! If you have any problem about your order, please feel free to contact us.
