atlas throttle lock: un asistente de acelerador de control de crucero para motocicleta, kit inferior
- Marca:
atlas throttle lock
- Código producto: B07533VGQ1
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 327.790
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-PLEASE READ: Find your Motorcycle by clicking the User Guide [pdf] under the "Product guides and documents" section below
-Thumb Activated Mechanical Motorcycle Cruise Control
-Adjust your speed while it's engaged for incremental speed adjustments
-You retain 100% throttle control whether engaged or disengaged
-Simple Bolt-On Installation made of Stainless Steel
The ATLAS Throttle Lock is a mechanical cruise control that fits on nearly every motorcycle. It?s called a throttle lock, which can be misleading because it doesn?t actually ?lock? the throttle of your motorcycle. When it?s engaged it simply holds your throttle in any position you leave it in. When you want to adjust your speed, simply rotate the throttle like normal. It uses pressure and friction to preven-the throttle from rotating freely. The atlas is clamped to the plastic throttle tube, between your rubber grip flange and the throttle housing so it doesn?t take up any grip space. It rotates with your throttle hand, is thumb activated and just over 1/4 inch thick. The ATLAS Throttle Lock has two buttons. One to engage the unit and another to disengage. You have the freedom to install the atlas at just the right angle so you are never reaching for the buttons, it is always right where you expect it to be. The atlas bolts on in less than 10 minutes and requires no modifications for most bikes. It works with hand guards and heated grips. When the atlas is engaged, a friction pad on a stainless steel tab presses against the throttle housing. It doesn?t disengage when you rotate the throttle. We did this intentionally so you can make incremental speed adjustments as you ride. You can override the atlas at all times. The ATLAS Throttle Lock comes in 2 different configurations: a top kit and a bottom kit. The top kit was designed for motorcycles with certain interferences, throttles with heated grip wires on the lower half of the grip, right-hand turn signals on the throttle housing. If there is less than 1.5 inches (38 mm) of clearance between the tank and the throttle housing at full right turn. The bottom ki-works with the majority of motorcycles. Works with throttles that have a heated grip wire that runs out the top half of the throttle grip flange.
-Thumb Activated Mechanical Motorcycle Cruise Control
-Adjust your speed while it's engaged for incremental speed adjustments
-You retain 100% throttle control whether engaged or disengaged
-Simple Bolt-On Installation made of Stainless Steel
The ATLAS Throttle Lock is a mechanical cruise control that fits on nearly every motorcycle. It?s called a throttle lock, which can be misleading because it doesn?t actually ?lock? the throttle of your motorcycle. When it?s engaged it simply holds your throttle in any position you leave it in. When you want to adjust your speed, simply rotate the throttle like normal. It uses pressure and friction to preven-the throttle from rotating freely. The atlas is clamped to the plastic throttle tube, between your rubber grip flange and the throttle housing so it doesn?t take up any grip space. It rotates with your throttle hand, is thumb activated and just over 1/4 inch thick. The ATLAS Throttle Lock has two buttons. One to engage the unit and another to disengage. You have the freedom to install the atlas at just the right angle so you are never reaching for the buttons, it is always right where you expect it to be. The atlas bolts on in less than 10 minutes and requires no modifications for most bikes. It works with hand guards and heated grips. When the atlas is engaged, a friction pad on a stainless steel tab presses against the throttle housing. It doesn?t disengage when you rotate the throttle. We did this intentionally so you can make incremental speed adjustments as you ride. You can override the atlas at all times. The ATLAS Throttle Lock comes in 2 different configurations: a top kit and a bottom kit. The top kit was designed for motorcycles with certain interferences, throttles with heated grip wires on the lower half of the grip, right-hand turn signals on the throttle housing. If there is less than 1.5 inches (38 mm) of clearance between the tank and the throttle housing at full right turn. The bottom ki-works with the majority of motorcycles. Works with throttles that have a heated grip wire that runs out the top half of the throttle grip flange.
