autel maxidiag advanced md808 escáner obdii de todos los sistemas para registro de reinicio de aceite y batería, reaprendizaje de pastillas de freno de estacionamiento, sas, srs, abs, epb, dpf, bms
- Marca:
autel
- Código producto: B0714GBRZK
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 517.257
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Read and clear trouble codes
-Support oil service reset
-Diesel particulate service including forced regeneration
-Storage Temperature- (-2-C) to 7-C (--F to 15-F)
TROUBLESHOOTING : Vehicle Linking Error A communication error occurs if the scan tool fails to communicate with the vehicle?s ECU (Electronic Control Unit). Please follow the instructions below to check up: Verify that the ignition is ON Check if the scan tool?s connector is securely connected to the vehicle?s DLC Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing Verify the control module is not defective . Operating Error If the scan tool freezes, then an exception occurs or the vehicle?s ECU (Electronic Control Unit) is too slow to respond to requests. Please follow the steps below to reset the tool Reset the scan tool. Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing. Scan tool doesn?t power up If the scan tool won?t power up or operates incorrectly in any other way, Please follow the instructions below to check up Check if the scan tool?s connector is securely connected to the vehicle?s DLC; Check if the DLC pins are bent or broken. Clean the DLC pins if necessary. Check vehicle battery to make sure it is still good with at least 8.0 volt. Operating Humidity: 5% - 95% non-condensing, Memory: 32MB, 166 MHz
-Support oil service reset
-Diesel particulate service including forced regeneration
-Storage Temperature- (-2-C) to 7-C (--F to 15-F)
TROUBLESHOOTING : Vehicle Linking Error A communication error occurs if the scan tool fails to communicate with the vehicle?s ECU (Electronic Control Unit). Please follow the instructions below to check up: Verify that the ignition is ON Check if the scan tool?s connector is securely connected to the vehicle?s DLC Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing Verify the control module is not defective . Operating Error If the scan tool freezes, then an exception occurs or the vehicle?s ECU (Electronic Control Unit) is too slow to respond to requests. Please follow the steps below to reset the tool Reset the scan tool. Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing. Scan tool doesn?t power up If the scan tool won?t power up or operates incorrectly in any other way, Please follow the instructions below to check up Check if the scan tool?s connector is securely connected to the vehicle?s DLC; Check if the DLC pins are bent or broken. Clean the DLC pins if necessary. Check vehicle battery to make sure it is still good with at least 8.0 volt. Operating Humidity: 5% - 95% non-condensing, Memory: 32MB, 166 MHz
