autosaver88 punta de escape de entrada de 3 pulgadas, punta de tubo de escape de acero inoxidable cromado de 3 "x 4" x 12 ", diseño de perno / almeja
- Marca:
autosaver88
- Código producto: B0771K17RY
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 67.185
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Notice: Please measure the outlet diameter of your pipe prior to purchase of this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (3 inches).
-Standard 3" x 4" x 12" inlet, outlet, and overall length respectively. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 3 inches.
-Made from stainless steel and chrome-plated finishing to provide a sleek look to your car exhaust.
-Protects your exhaust pipe from sunlight and rain to prevent rusting and deformation.
-Bolt-on design easily fastens to the exhaust pipe after tightening screws.
Installation Steps:
Step 1: Clean the surface of your tailpipe.
Clean the dirt and sand on your tailpipe with penetrating oil and a shop rag.
(Make sure your tailpipe is at room temperature, and do not clean the surface of the tailpipe after don't do this when the car just went out).
Step 2: Slide the exhaust tip into your tailpipe.
Try to slide the exhaust tip into the tailpipe. You may encounter some resistance, so, if necessary, use automotive grease to lubricate the pieces if necessary.
Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.
Step 3: Fasten /w Weld the exhaust tip.
Tighten screws and clamps to secure the exhaust tips. Should , if you worry that it is not tight enough, you can weld a joint between the edges of the tailpipe and the exhaust tip.
Then, tThe installation is complete.
Protect the Original Tailpipe:
Protect the original exhaust pipe from sun and rain, to avoid prevent rusting and deformation.
Nice Looking:
The cChrome-plated finish, bright as a mirror, makes the exhaust tip looks shiny bright., and decorates your car nicely.
Specification:
Inlet Size: 3 Inch Inside Diameter
Outlet Size: 4 Inch Outside Diameter
Length: 12 Inch Overall Length
Material: Chrome-PlatedBlack Paint Finish Stainless Steel
Package: 1 piece exhaust tip.
Note: Please measure the size of your exhaust pipe prior tobefore purchase of this exhaust tip.
-Standard 3" x 4" x 12" inlet, outlet, and overall length respectively. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 3 inches.
-Made from stainless steel and chrome-plated finishing to provide a sleek look to your car exhaust.
-Protects your exhaust pipe from sunlight and rain to prevent rusting and deformation.
-Bolt-on design easily fastens to the exhaust pipe after tightening screws.
Installation Steps:
Step 1: Clean the surface of your tailpipe.
Clean the dirt and sand on your tailpipe with penetrating oil and a shop rag.
(Make sure your tailpipe is at room temperature, and do not clean the surface of the tailpipe after don't do this when the car just went out).
Step 2: Slide the exhaust tip into your tailpipe.
Try to slide the exhaust tip into the tailpipe. You may encounter some resistance, so, if necessary, use automotive grease to lubricate the pieces if necessary.
Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.
Step 3: Fasten /w Weld the exhaust tip.
Tighten screws and clamps to secure the exhaust tips. Should , if you worry that it is not tight enough, you can weld a joint between the edges of the tailpipe and the exhaust tip.
Then, tThe installation is complete.
Protect the Original Tailpipe:
Protect the original exhaust pipe from sun and rain, to avoid prevent rusting and deformation.
Nice Looking:
The cChrome-plated finish, bright as a mirror, makes the exhaust tip looks shiny bright., and decorates your car nicely.
Specification:
Inlet Size: 3 Inch Inside Diameter
Outlet Size: 4 Inch Outside Diameter
Length: 12 Inch Overall Length
Material: Chrome-PlatedBlack Paint Finish Stainless Steel
Package: 1 piece exhaust tip.
Note: Please measure the size of your exhaust pipe prior tobefore purchase of this exhaust tip.
