subthump exclusivo camaro boston 2010-2015 con arnés de integración de amplificador
- Marca:
subthump
- Código producto: B01BP711FE
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 174.005
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Provides 4 channel RCA Pre-Amp Output Jacks to your Factory Boston System
-Perfect for adding a sub to your existing 9 speaker factory Boston Acoustic System
-Does NOT interfere with, replace, or alter the factory boston amp and speaker system in any way shape or form
-Plugs into the Boston Amp in Trunk of Car (Not the radio). Anyone can install this device in minutes
-Saves time and eliminates the guesswork of searching for the right wires in the amp harness to tap into. Works with All BA Head Units, Including MyLink
Easily Add An Amplifier To Your 2010-2015 Camaro Boston Acoustic Sound System. Our integration harness connects to your Boston Amplifier in your Trunk to provide rca jacks and a 12v trigger for hooking up additional amplifiers. Do you own a 2010-2015 Camaro and are wanting to install an aftermarket sub and sub amp? If the answer is yes, then we have the perfect product for you. We have developed an extremely useful plug and play T-harness that will allow you to add RCA outputs to your factory Boston Acoustics sound system. To install the device, you simply unhook the lower connector on your factory amp (found in your trunk behind the back wall carpet on divers side) and plug our special output harness in-between your amp and stock harness. The harness is designed to give you RCA outputs and a turn-on lead for sending signal and switched power to your aftermarket amp. The simple plug and play feature eliminates the hassle and guesswork of finding which wires to use for your signal and turn-on wires. No more degrading your factory harness by splicing or soldering into it. Don't waste hours trying to get signal to your amp. If you want to cut hours off your install time and make things easier on yourself, pick one of these up today. Please note that this harness provides signal and switched power only. We keep getting the misconception that this will 'run your new amp'. It will not do so by itself. You will still need to provide power and ground wires from your battery to your amp as well. Installs in seconds. Plugs into BA Amp in Trunk Watch the video below to see how it works. http://www.youtube.com/watch?v=WKWZjUnoZvw Please be sure that your Camaro has the Boston Acoustics Sound System. Will not work on Non-Boston (ie Base Stereo). The Boston System is standard on 2LT and 2SS and optional on 1LT and 1SS. A good way to tell is if your front door speaker grille has the boston emblem, then you have the Boston Acoustics System.
-Perfect for adding a sub to your existing 9 speaker factory Boston Acoustic System
-Does NOT interfere with, replace, or alter the factory boston amp and speaker system in any way shape or form
-Plugs into the Boston Amp in Trunk of Car (Not the radio). Anyone can install this device in minutes
-Saves time and eliminates the guesswork of searching for the right wires in the amp harness to tap into. Works with All BA Head Units, Including MyLink
Easily Add An Amplifier To Your 2010-2015 Camaro Boston Acoustic Sound System. Our integration harness connects to your Boston Amplifier in your Trunk to provide rca jacks and a 12v trigger for hooking up additional amplifiers. Do you own a 2010-2015 Camaro and are wanting to install an aftermarket sub and sub amp? If the answer is yes, then we have the perfect product for you. We have developed an extremely useful plug and play T-harness that will allow you to add RCA outputs to your factory Boston Acoustics sound system. To install the device, you simply unhook the lower connector on your factory amp (found in your trunk behind the back wall carpet on divers side) and plug our special output harness in-between your amp and stock harness. The harness is designed to give you RCA outputs and a turn-on lead for sending signal and switched power to your aftermarket amp. The simple plug and play feature eliminates the hassle and guesswork of finding which wires to use for your signal and turn-on wires. No more degrading your factory harness by splicing or soldering into it. Don't waste hours trying to get signal to your amp. If you want to cut hours off your install time and make things easier on yourself, pick one of these up today. Please note that this harness provides signal and switched power only. We keep getting the misconception that this will 'run your new amp'. It will not do so by itself. You will still need to provide power and ground wires from your battery to your amp as well. Installs in seconds. Plugs into BA Amp in Trunk Watch the video below to see how it works. http://www.youtube.com/watch?v=WKWZjUnoZvw Please be sure that your Camaro has the Boston Acoustics Sound System. Will not work on Non-Boston (ie Base Stereo). The Boston System is standard on 2LT and 2SS and optional on 1LT and 1SS. A good way to tell is if your front door speaker grille has the boston emblem, then you have the Boston Acoustics System.
