amplificador marino pyle hydra - serie elite mejorada amplificador puenteable de 1000 vatios y 4 canales tri-mode configurable, impermeable, fuente de alimentación mosfet, controles de nivel de ganancia y entrada estéreo rca
- Marca:
pyle
- Código producto: B00068U9Y8
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 237.077
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle?s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters
-PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
-SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
-POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
-MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It?s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
-Waterproof four-channel, bridgeable MOSFET power amplifier with 4 x 250 Watts maximum output
-Variable high- and low-pass filters with crossover mode selector
-High-level MOLEX and gold-plated low-level RCA inputs with adjustable input level
-Overload, Short Circuit, and Thermal protection with LED indicator
-Variable bass boost of up to 18dB at 60Hz
Product DescriptionDual variable high/low electronic crossover & bass boost. Power on LED indicator. LED protection indicator. Blue LED level display. Tri-mode configurable. Dim: 2.7"H x 12"W x 10.9"D. 4 channel. 1,000W. 250W x 4 @ 4_. The Waterproof Marine Bridgeable MOSFET amplifiers extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands. The PLMRA420 features 4 channels and 1000 watts of power.Amazon.comThis Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool--it's completely waterproof. This four-channel, 1000-watt bridgeable marine amp takes both high- and low-level inputs, so it's compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. A blue LED level display lets you keep an eye on your signal, and for protection, you can count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.Power your speakers on the dock, in your boat, or by the pool.View a feature diagram.Input OptionsThe PLMRA420 features gold-plated low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level MOLEX inputs.Input Level ControlAdjust the line level input for the least amount of distortion to match your source unit.Bass BoostAdd a little low-end boost with selectable bass boost of up to approximately 18dB at 60Hz.High- and Low-Pass FiltersOptimize the output to match your speakers exactly, using the variable high-pass and low-pass frequency controls.Crossover Mode SelectorRoute the output of the low-pass or high-pass filters or the full signal to the internal power amplifier, or the full range if preferred.ProtectionProtect the amp and your vehicle's electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. LED lights indicate if the amp has gone into a protection mode. Finally, an anti-thump turn-on feature protects your speakers during power-up.Pyle PLMRA420 Select SpecificationsPower Rating:250 Watts x 4 Maximum Output at 4 ohms35 Watts x 4 RMS at 4 ohms50 Watts x 4 RMS at 2 ohms T.H.D:< 0.04%S/N Ratio:> 95dBPower Supply Voltage:14.4V DC Neg. Ground (10.5-16V)Frequency Response:15 Hz-30 KHzInput Impedance:Low Level: 10K OhmsHigh Level: 100 OhmsInput Sensitivity:Low Level: 250mVHigh Level: 2.5VDimensions:10.9 x 2.7 x 12 Inches (L x W x H)What's in the BoxPyle PLMRA420 Amplifier, Mounting Hardware, User's Manual
-PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
-SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
-POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
-MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It?s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
-Waterproof four-channel, bridgeable MOSFET power amplifier with 4 x 250 Watts maximum output
-Variable high- and low-pass filters with crossover mode selector
-High-level MOLEX and gold-plated low-level RCA inputs with adjustable input level
-Overload, Short Circuit, and Thermal protection with LED indicator
-Variable bass boost of up to 18dB at 60Hz
Product DescriptionDual variable high/low electronic crossover & bass boost. Power on LED indicator. LED protection indicator. Blue LED level display. Tri-mode configurable. Dim: 2.7"H x 12"W x 10.9"D. 4 channel. 1,000W. 250W x 4 @ 4_. The Waterproof Marine Bridgeable MOSFET amplifiers extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands. The PLMRA420 features 4 channels and 1000 watts of power.Amazon.comThis Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool--it's completely waterproof. This four-channel, 1000-watt bridgeable marine amp takes both high- and low-level inputs, so it's compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. A blue LED level display lets you keep an eye on your signal, and for protection, you can count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.Power your speakers on the dock, in your boat, or by the pool.View a feature diagram.Input OptionsThe PLMRA420 features gold-plated low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level MOLEX inputs.Input Level ControlAdjust the line level input for the least amount of distortion to match your source unit.Bass BoostAdd a little low-end boost with selectable bass boost of up to approximately 18dB at 60Hz.High- and Low-Pass FiltersOptimize the output to match your speakers exactly, using the variable high-pass and low-pass frequency controls.Crossover Mode SelectorRoute the output of the low-pass or high-pass filters or the full signal to the internal power amplifier, or the full range if preferred.ProtectionProtect the amp and your vehicle's electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. LED lights indicate if the amp has gone into a protection mode. Finally, an anti-thump turn-on feature protects your speakers during power-up.Pyle PLMRA420 Select SpecificationsPower Rating:250 Watts x 4 Maximum Output at 4 ohms35 Watts x 4 RMS at 4 ohms50 Watts x 4 RMS at 2 ohms T.H.D:< 0.04%S/N Ratio:> 95dBPower Supply Voltage:14.4V DC Neg. Ground (10.5-16V)Frequency Response:15 Hz-30 KHzInput Impedance:Low Level: 10K OhmsHigh Level: 100 OhmsInput Sensitivity:Low Level: 250mVHigh Level: 2.5VDimensions:10.9 x 2.7 x 12 Inches (L x W x H)What's in the BoxPyle PLMRA420 Amplifier, Mounting Hardware, User's Manual
