6pcs xl4015 e1 placa de módulo de cargador de batería de litio 5a dc a dc cc cv módulo de placa de carga reductora módulo de convertidor de potencia led cargador módulo reductor placa de convertidor
- Marca:
atnsinc
- Código producto: B089NG9TFW
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 32.188
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-? High power, high efficiency, 5A, low ripple.
-? Module Properties: non-isolated constant current and voltage module?Rectification: non-synchronous rectification.
-? Input Voltage: 5V-32V; Output voltage: 0.8V-30V; Max Load: 75W/5A Peak, 50W/3.5A Sustained (whichever is lower, amps or watts).
-? Note: Input must be at least 1V higher than the output voltage.
-? Package Included: 6PCS Lithium Battery Step down Charge Board.
Specification: Input voltage: 4 -38 V Output voltage:1.25 -36 V continuously adjustable Output current:Adjustable maximum 5A Output power:Max 75 W Working temperature:-40 ~ ++ 85 degrees Working frequency:180 KHz Turnover efficiency:Maximum 96% Short circuit protection:(Limited flow 8A) About temperature protection:Yes (about temperature, automatic turn off output). Input Reverse Connection Protection:No, if necessary, input a high flow diode into the input. Installation:4 3mm wires. Connection mode:Terminal or welding terminal, V -IN as input and V -OUT as output. Module size:Approx. 61.7*26.2*15mm/2.42*1.03*0.59in Features: Triple:(1) Use as a normal blood pressure modules with overcurrent protection capability;(2) As the various voltage lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery) charger for solar panels, wind turbines and other occasions;(3) Used as a high-power LED constant current drive module; With constant pressure and constant current modes, there are light indicates which mode is currently in module;4. When used as a lithium battery charger, you can set the float voltage and the charge current size, there is light indicates is being charged or has been filled; Has the current limit protection, output short circuit even if it will not burn module. This module uses machine placement, reflow soldering, and each module shipments have been two hours before the aging tests to ensure high reliability. Overtemperature protection: (automatically shut off the output after overtemperature)?Input reverse polarity protection: None, (if necessary, please enter the string into the high current diode).
-? Module Properties: non-isolated constant current and voltage module?Rectification: non-synchronous rectification.
-? Input Voltage: 5V-32V; Output voltage: 0.8V-30V; Max Load: 75W/5A Peak, 50W/3.5A Sustained (whichever is lower, amps or watts).
-? Note: Input must be at least 1V higher than the output voltage.
-? Package Included: 6PCS Lithium Battery Step down Charge Board.
Specification: Input voltage: 4 -38 V Output voltage:1.25 -36 V continuously adjustable Output current:Adjustable maximum 5A Output power:Max 75 W Working temperature:-40 ~ ++ 85 degrees Working frequency:180 KHz Turnover efficiency:Maximum 96% Short circuit protection:(Limited flow 8A) About temperature protection:Yes (about temperature, automatic turn off output). Input Reverse Connection Protection:No, if necessary, input a high flow diode into the input. Installation:4 3mm wires. Connection mode:Terminal or welding terminal, V -IN as input and V -OUT as output. Module size:Approx. 61.7*26.2*15mm/2.42*1.03*0.59in Features: Triple:(1) Use as a normal blood pressure modules with overcurrent protection capability;(2) As the various voltage lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery) charger for solar panels, wind turbines and other occasions;(3) Used as a high-power LED constant current drive module; With constant pressure and constant current modes, there are light indicates which mode is currently in module;4. When used as a lithium battery charger, you can set the float voltage and the charge current size, there is light indicates is being charged or has been filled; Has the current limit protection, output short circuit even if it will not burn module. This module uses machine placement, reflow soldering, and each module shipments have been two hours before the aging tests to ensure high reliability. Overtemperature protection: (automatically shut off the output after overtemperature)?Input reverse polarity protection: None, (if necessary, please enter the string into the high current diode).
