alamscn 5v boost converter módulo de potencia elevador batería de litio placa de protección de carga de iones de litio 134n3p con puerto usb y micro para cargador de bricolaje

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Charging and discharging: 134N3P has built-in charging and discharging power MOS, the charging current can be set, the maximum charging current and maximum discharging current are 1A.
-Safety protection function: Constant over temperature protection, overcharge and over discharge protection, output overvoltage protection, output overload protection, output short circuit protection, etc.
-Charge status indication: Charging- The red light flashes while charging; Red light is always on, charging is complete. Discharge- The blue light flashes.
-Application: Batteries like Polymer ,18650 Lithium ,Cell Phone ,Tablet and MP3 Battery ect.
-Note: To connect with lithium batteries, it can only be connected in parallel with a voltage of 3.7-4.2V, not in series.

Features:1. Charge and discharge status indication2. Built-in charging and discharging power MOS3. Integrated charge management and discharge management4. Intelligent temperature control and over temperature protection5. Integrated output overvoltage protection, short circuit protection, heavy duty protection6. Integrated overcharge and over discharge protection7. Supports turbulence mode and zero voltage chargingApplication: Batteries like Polymer ,18650 Lithium ,Cell Phone ,Tablet and MP3 Battery ect.Note-The step up charging board can be connected to a lithium battery an-connected in multiple sections of lithium batteries, as long as the voltage is 3.7-4.2V in parallel(only be connected in parallel, not in series)Specification:1. Input voltage: 3.7V~5.5V2. Charging current: up to 1A3. Output current: up to 1A (please do not take longer than 1200mA current device)4. Output voltage: 5V5. BAT discharge termination voltage: 2.9V6. Preset 4.2V charging voltage with an accuracy of-1%7. Discharge efficiency: 85% (input 3.7V, output 5V/1A)8. Maximum 8uA standby currentPackage included:12 x 5V Battery Charging Protection Board