vincos 20ft 6 an 6an an6 nylon y acero inoxidable trenzado aceite gas combustible manguera línea de combustible + 10 piezas 6an kit de conexión de manguera

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Package Including: 20 Ft Braided Fuel/Oil/Gas Line Kit(10pcs 6AN hose fitting + 20Ft AN6 Stainless Steel Oil line)
-Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.
-Hose Material: Nylon and Stainless Steel Braided + CPE Synthetic Rubber; The fitting is made of T6061 Aluminum,high strength and good durability.
-Working Temperature: -40 F to +248 F. Working Pressure:500 PSI
-Excellently Sealed,100% no leaking .Exchange or return if leak.


Specification:
**Color:Black
**Size:AN-6
**Inner diameter(ID): 0.342inch=8.71mm
**Outside diameter(OD):0.54inch=13.70mm
**Inner hose Materail:CPE Synthetic Outer
**Outside Materail:Nylon and Stainless Steel
**Fitting Material: High Quality 6061 Aluminum Alloy

Application:
1.For use with fuel systems, methanol, oils, lubricants, coolant system and vacuum applications.
2.Suitable for fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes.
3.This hose isn't suitable for brake fluid and is not to be used near extreme heat sources such as a turbocharger.

Package Includes:
1 pc 20FT AN-6 Nylon Braided Hose
4 pcs AN-8 Straight Swivel Hose End
2 pcs AN-8 45 Degree Swivel Hose End
2 pcs AN-8 90 Degree Swivel Hose End
2 pcs AN-8 180 Degree Swivel Hose End

Feature:
1.Working Temperature:-40F to 248F (-4--C to + 12--C) under most operating conditions
2.Working Pressure:500 PSI
3.Burst pressure: 2000 PSI

How to Cut:
For cutting your new steel braided hose to length you will need:
* Cutting wheel/ hack saw/ or steel braided hose cutters
* Duct tape or electrical tape (work best)
1.Measure your hose and find desired length.
2.Tape hose at measured length needed for application.
3.Cut hose threw the tape you have placed.(This keep the steel braid from fraying)
4.Remove the tape.
5.Slide one end of hose into end of fitting.
6.Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7.Make sure all connection are tight.