sistema de sentina seca seaflo
- Marca:
seaflo
- Código producto: B07V4G41K4
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 335.395
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Removes all still water remaining from normal bilge pump operation
-User programmable interface for manual or automatic operation
-Keeps your bilge clean and dry unlike any other product or system in the industry
-Helps prevent mold, mildew, mustiness, odors, and rot from leftover still water
-Approx. Dimensions: 12" x 7.5" x 3.75" Voltage: 12V Max Draw: 5.5 A
IntroductionMeet SEAFLO's brand new, patent-pending, dry bilge system. The SEAFLO Dry Bilge System is the most economical and reliable way to keep your bilge clean and completely dry. Traditional bilge pumps and float switches leave at least 3?4? of water in your bilge at all times. This still water can lead to mold, mildew, mustiness, odors, rot and affect the integrity of your hull. The SEAFLO Dry Bilge System removes all still water from the lowest part of your bilge, or other water-containing compartments. The system is self-priming up to 25 feet, so it can be mounted remotely from the suction foot. The system is activated either by the easy-to-use programmable timer, or manually by a toggle switch. Activate the system as much or as little as you would like, depending on your vessel and conditions. This system also greatly increases bilge pump and float switch lifetime because of their reduced use.CAUTION-The SEAFLO Dry Bilge System is NOT a replacement for a conventional bilge pump. This system is a supplemental, low flow system meant to keep out low volumes of water. This system should never be used as a conventional bilge pump nor should it ever be relied upon to maintain the flotation of a vessel.DetailsEquipped w/ built-in programmable timer for automatic usageHigh-impact durable plastic housingCompletely empties bilge of water unlike any other pump on the marketQuick connect connections with 1/4" flexible lineIncludes comprehensive user manual with installation instructions and wiring diagramPrevents mold, mildew, and rot buildup from leftover waterTechnical specificationsModel-SFDBS1-01Flow Rate: 0.3GPM (1 LPM)Voltage: 12VSelf Priming: 25'Max Draw: 5.5 AOutlet Diameter: 1/2" barbedWeight: 5.18 lbsDimensions: Approx. 12" x 7.5" x 3.75"
-User programmable interface for manual or automatic operation
-Keeps your bilge clean and dry unlike any other product or system in the industry
-Helps prevent mold, mildew, mustiness, odors, and rot from leftover still water
-Approx. Dimensions: 12" x 7.5" x 3.75" Voltage: 12V Max Draw: 5.5 A
IntroductionMeet SEAFLO's brand new, patent-pending, dry bilge system. The SEAFLO Dry Bilge System is the most economical and reliable way to keep your bilge clean and completely dry. Traditional bilge pumps and float switches leave at least 3?4? of water in your bilge at all times. This still water can lead to mold, mildew, mustiness, odors, rot and affect the integrity of your hull. The SEAFLO Dry Bilge System removes all still water from the lowest part of your bilge, or other water-containing compartments. The system is self-priming up to 25 feet, so it can be mounted remotely from the suction foot. The system is activated either by the easy-to-use programmable timer, or manually by a toggle switch. Activate the system as much or as little as you would like, depending on your vessel and conditions. This system also greatly increases bilge pump and float switch lifetime because of their reduced use.CAUTION-The SEAFLO Dry Bilge System is NOT a replacement for a conventional bilge pump. This system is a supplemental, low flow system meant to keep out low volumes of water. This system should never be used as a conventional bilge pump nor should it ever be relied upon to maintain the flotation of a vessel.DetailsEquipped w/ built-in programmable timer for automatic usageHigh-impact durable plastic housingCompletely empties bilge of water unlike any other pump on the marketQuick connect connections with 1/4" flexible lineIncludes comprehensive user manual with installation instructions and wiring diagramPrevents mold, mildew, and rot buildup from leftover waterTechnical specificationsModel-SFDBS1-01Flow Rate: 0.3GPM (1 LPM)Voltage: 12VSelf Priming: 25'Max Draw: 5.5 AOutlet Diameter: 1/2" barbedWeight: 5.18 lbsDimensions: Approx. 12" x 7.5" x 3.75"
